IDES Prospector Already have an account? Login Here

IDES

SABIC® PPcompound 2636

Polypropylene

Mineral Filler

Supplied by Saudi Basic Industries Corporation (SABIC)

The technical datasheet with complete property values for SABIC® PPcompound 2636 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Filler / Reinforcement 
  • Mineral Filler
Uses 
  • Automotive Applications
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
 ISO 1133
Mechanical
Nominal Value
Unit
Test Method
Tensile Stress
     ISO 527-2/5/50
Yield, 0.126 in
psi
  
Break, 0.126 in
psi
  
Tensile Strain (Break, 0.126 in)
%
 ISO 527-2/5/50
Flexural Modulus 2
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength (73°F)
ft·lb/in²
 ISO 179
Notched Izod Impact Strength
     ISO 180/3A
32°F
ft·lb/in²
  
73°F
 
  
Hardness
Nominal Value
Unit
Test Method
Shore Hardness (Shore D)
 
 ISO 868
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature (66 psi, Unannealed)
°F
 ISO 75-2/B
Vicat Softening Temperature
°F
 ISO 306/A50
CLTE - Flow
in/in/°F
 ASTM D696
Additional Information
Mold Shrinkage, SABIC Method: 1%
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: SABIC® PPcompound 2636, SABIC PPcompound 2636, SABIC® PPcompound , SABIC PPcompound, SABICPPcompound2636, SABICPPcompound, PPcompound 2636, PPcompound2636, PPcompound, 2636, Polypropylene, Unspecified, Polypropylene Unspecified, PP, Unspecified, PP Unspecified, Polypropylene, PP, SABIC, PolypropyleneUnspecified, PPUnspecified, 2636PPcompound
Generic Name
Generic Name may also be described by the following terms: Polypropilene, Polypropelene.
Uses
Uses may also be described by the following terms: Automotive Applications, Automotive Sector.
Notes
1Typical properties: these are not to be construed as specifications.
2Method I (3 point load)
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.