IDES Prospector Already have an account? Login Here

IDES

SABIC® PPcompound 7996

Polypropylene

Mineral Filler

Supplied by Saudi Basic Industries Corporation (SABIC)

The technical datasheet with complete property values for SABIC® PPcompound 7996 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
SABIC® PPcompound 7996 is a modified mineral filled Polypropylene for automotive exterior applications. The material combines high flow, very high stiffness, good scratch resistance and an excellent UV performance. The combination of a broad processing window and good mechanical properties and the UV resistance make it suited for demanding aesthetic automotive exterior applications.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Filler / Reinforcement 
  • Mineral Filler
Features 
  • Good Processability
  • Good UV Resistance
  • High Flow
  • Scratch Resistant
  • Ultra High Stiffness
Uses 
  • Automotive Exterior Parts
  • Automotive Interior Parts
  
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR)
     ISO 1133
230°C/2.16 kg
g/10 min
  
230°C/5.0 kg
g/10 min
  
Mechanical
Nominal Value
Unit
Test Method
Tensile Stress
     ISO 527-2/5/50
Yield, 0.126 in
psi
  
Break, 0.126 in
psi
  
Tensile Strain (Break, 0.126 in)
%
 ISO 527-2/5/50
Flexural Modulus 2
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength (73°F)
ft·lb/in²
 ISO 179
Charpy Unnotched Impact Strength (-40°F)
ft·lb/in²
 ISO 179
Notched Izod Impact Strength
     ISO 180/3A
-4°F
ft·lb/in²
  
32°F
ft·lb/in²
  
73°F
ft·lb/in²
  
Hardness
Nominal Value
Unit
Test Method
Shore Hardness (Shore D)
 
 ISO 868
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature (66 psi, Unannealed)
°F
 ISO 75-2/B
Vicat Softening Temperature
°F
 ISO 306/A50
CLTE - Flow
in/in/°F
 ASTM D696
Additional Information
Mold Shrinkage, SABIC Method: 0.9%
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: SABIC® PPcompound 7996, SABIC PPcompound 7996, SABIC® PPcompound , SABIC PPcompound, SABICPPcompound7996, SABICPPcompound, PPcompound 7996, PPcompound7996, PPcompound, 7996, Polypropylene, Unspecified, Polypropylene Unspecified, PP, Unspecified, PP Unspecified, Polypropylene, PP, SABIC, PolypropyleneUnspecified, PPUnspecified, 7996PPcompound
Generic Name
Generic Name may also be described by the following terms: Polypropilene, Polypropelene.
Features
Features may also be described by the following terms: Ultra High Stiffness, High Flow, High Melt, High MFI, Good UV Resistance, UV Resistant, Ultraviolet Resistant, Ultraviolet Light Resistant, Scratch Resistant, Resists Scratches, Good Processability, Easy Processing.
Notes
1Typical properties: these are not to be construed as specifications.
2Method I (3 point load)
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.