IDES Prospector Already have an account? Login Here

IDES

SABIC® Vestolen P 9026S

Polypropylene Homopolymer

Supplied by Saudi Basic Industries Corporation (SABIC)

The technical datasheet with complete property values for SABIC® Vestolen P 9026S is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
This polypropylene grade is a flame-retardant high molecular weight homopolymer. It meets the DIN 4102 requirements for the B1 flamability class. It is approved for applications up to 10 mm thickness. It is used for waste discharge pipes inside buildings, exhaust air ducts, exhaust gas pipes and sheets for the construction of tanks and containers.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Features 
  • Flame Retardant
  • High Molecular Weight
  • Homopolymer
Uses 
  • Containers
  • Piping
  • Sheet
  • Tanks
  
Forms 
  • Pellets
Processing Method 
  • Extrusion
  • Pipe Extrusion
  
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR)
     ISO 1133
190°C/5.0 kg
g/10 min
  
230°C/2.16 kg
g/10 min
  
Mechanical
Nominal Value
Unit
Test Method
Tensile Stress
     ISO 527-2/50
Yield, 0.0787 in
psi
  
Break, 0.0787 in
psi
  
Tensile Strain (Break, 0.0787 in)
%
 ISO 527-2/50
Flexural Modulus 2
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength (73°F)
ft·lb/in²
 ISO 179
Charpy Unnotched Impact Strength (73°F)
ft·lb/in²
 ISO 179
Notched Izod Impact Strength (73°F)
ft·lb/in²
 ISO 180/A
Thermal
Nominal Value
Unit
Test Method
Vicat Softening Temperature
      
--
°F
 ISO 306/A50
--
°F
 ISO 306/B50
Additional Information
Strain at Break, ISO 527, 2mm, 50mm/min: >50%
Charpy Unnotched Impact, ISO 179, 23°C: >60 kJ/m²
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: SABIC® Vestolen P 9026S, SABIC Vestolen P 9026S, SABIC® Vestolen P , SABIC Vestolen P, SABICVestolenP9026S, SABICVestolenP, P 9026 S, P9026S, P9026, 9026 S, 9026S, Polypropylene Homopolymer, PP Homopolymer, Polypropylene, PP, SABIC, PolypropyleneHomopolymer, PPHomopolymer, S9026, 9026P
Features
Features may also be described by the following terms: High Molecular Weight, High MW.
Uses
Uses may also be described by the following terms: Piping, Pipe.
Notes
1Typical properties: these are not to be construed as specifications.
2Method I (3 point load)
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.