IDES Prospector Already have an account? Login Here

IDES

SABIC® PPcompound 15T1020

Polypropylene Homopolymer

Talc Filler, 20%

Supplied by Saudi Basic Industries Corporation (SABIC)

The technical datasheet with complete property values for SABIC® PPcompound 15T1020 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
SABIC® PPcompound 15T1020 is a 20% talc-filled polypropylene homopolymer. The materials high modulus and good thermal stabilization makes it suited for applications under the bonnet such as heating, ventilation and air conditioning housings.

SABIC® PPcompound 15T1020 is a designated automotive grade.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Filler / Reinforcement 
  • Talc Filler, 20% Filler by Weight
Additive 
  • Heat Stabilizer
Features 
  • Heat Stabilized
  • High Stiffness
  • Homopolymer
Uses 
  • Automotive Applications
  • Automotive Under the Hood
  • Housings
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
 ISO 1133
Molding Shrinkage (24 hr)
%
 Internal Method
Mechanical
Nominal Value
Unit
Test Method
Tensile Stress
     ISO 527-2/5/50
Yield, 0.126 in, Injection Molded
psi
  
Break, 0.126 in, Injection Molded
psi
  
Tensile Strain (Break, 0.126 in, Injection Molded)
%
 ISO 527-2/5/50
Flexural Modulus 2 (Injection Molded)
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength (73°F, Injection Molded)
ft·lb/in²
 ISO 179
Charpy Unnotched Impact Strength (-40°F, Injection Molded)
ft·lb/in²
 ISO 179
Notched Izod Impact Strength
     ISO 180/3A
-4°F, Injection Molded
ft·lb/in²
  
32°F, Injection Molded
ft·lb/in²
  
73°F, Injection Molded
ft·lb/in²
  
Hardness
Nominal Value
Unit
Test Method
Shore Hardness (Shore D)
 
 ISO 868
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature (66 psi, Unannealed)
°F
 ISO 75-2/B
Vicat Softening Temperature
°F
 ISO 306/A
CLTE - Flow
     ASTM D696
-22 to 86°F
in/in/°F
  
73 to 176°F
in/in/°F
  
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: SABIC® PPcompound 15T1020, SABIC PPcompound 15T1020, SABIC® PPcompound , SABIC PPcompound, SABICPPcompound15T1020, SABICPPcompound, PPcompound 15 T 1020, PPcompound15T1020, PPcompound15, PPcompound, 15 T 1020, 15T1020, 15T, T1020, Polypropylene Homopolymer, PP Homopolymer, Polypropylene, PP, SABIC, PolypropyleneHomopolymer, PPHomopolymer, T15, 15PPcompound
Features
Features may also be described by the following terms: High Stiffness, Heat Stabilized, Heat-ageing Stabilized, Heat Ageing Stabilized, Heat-aging Stabilized, Heat Aging Stabilized.
Uses
Uses may also be described by the following terms: Housings, Housing, Automotive Applications, Automotive Sector.
Notes
1Typical properties: these are not to be construed as specifications.
2Method I (3 point load)
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.