IDES Prospector Already have an account? Login Here

IDES

SABIC® STAMAX 50YM240

Polypropylene

Long Glass Fiber, 50%

Supplied by Saudi Basic Industries Corporation (SABIC)

The technical datasheet with complete property values for SABIC® STAMAX 50YM240 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
SABIC® STAMAX 50YM240 is a 50% long glass fiber reinforced grade with improved flow properties (12 mm glass fiber length). The glass fibres are chemically coupled to the PP matrix, resulting in high stiffness and strength.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Filler / Reinforcement 
  • Long Glass Fiber, 50% Filler by Weight
Features 
  • Chemically Coupled
  • Good Flow
  • High Stiffness
  • High Strength
  • Homopolymer
Automotive Specifications 
Appearance 
  • Black
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus (73°F, Injection Molded)
psi
 ISO 527-2/1B
Tensile Stress (Yield, 73°F, Injection Molded)
psi
 ISO 527-2/1B
Tensile Strain (Break, 73°F, Injection Molded)
%
 ISO 527-2/1B
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength (73°F, Injection Molded)
ft·lb/in²
 ISO 179/1eA
Charpy Unnotched Impact Strength (73°F, Injection Molded)
ft·lb/in²
 ISO 179/1eU
Additional Information
Nominal Value
Unit
Test Method
Glass Fiber Content 2
%
 ISO 3451
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: SABIC® STAMAX 50YM240, SABIC STAMAX 50YM240, SABIC® STAMAX , SABIC STAMAX, SABICSTAMAX50YM240, SABICSTAMAX, STAMAX 50 YM 240, STAMAX50YM240, STAMAX50, STAMAX, 50 YM 240, 50YM240, 50YM, YM240, Polypropylene, Unspecified, Polypropylene Unspecified, PP, Unspecified, PP Unspecified, Polypropylene, PP, SABIC, PolypropyleneUnspecified, PPUnspecified, YM50, 50STAMAX
Generic Name
Generic Name may also be described by the following terms: Polypropilene, Polypropelene.
Features
Features may also be described by the following terms: High Strength, High Stiffness, Good Flow.
Automotive Specifications
This plastic material has approval for 3 automotive specifications from the following agencies (the number in parentheses shows the number of specifications for that agency): OPEL (2), GM (1).
Notes
1Typical properties: these are not to be construed as specifications.
212 mm length
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.