IDES Prospector Already have an account? Login Here

IDES

SABIC® HDPE B5421

High Density Polyethylene

Supplied by Saudi Basic Industries Corporation (SABIC)

The technical datasheet with complete property values for SABIC® HDPE B5421 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
SABIC® HDPE B5421 is developed for blow moulding consumer packaging up to 5 l, combining a good stiffness with an excellent ESCR. This grade is suitable for packaging detergents, cleaners, shampoos and cosmetics at a higher ESCR demand.

The product mentioned herein is in particular not tested and therefore not validated for use in pharmaceutical/ medical applications.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Features 
  • High ESCR (Stress Crack Resist.)
Uses 
  • Blow Molding Applications
  • Packaging
  
Forms 
  • Pellets
Processing Method 
  • Blow Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR)
     ISO 1133
190°C/2.16 kg
g/10 min
  
190°C/21.6 kg
g/10 min
  
190°C/5.0 kg
g/10 min
  
Environmental Stress-Cracking Resistance 2 (167°F, 0.0394 in, Rhodacal-DS10, Compression Molded)
hr
 Internal Method
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus (0.0787 in, Compression Molded)
psi
 ISO 527-2/1BA/1
Tensile Stress
     ISO 527-2/1BA/50
Yield, 0.0787 in, Compression Molded
psi
  
Break, 0.0787 in, Compression Molded
psi
  
Tensile Strain (Break, 0.0787 in, Compression Molded)
%
 ISO 527-2/1BA/50
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact Strength
     ISO 180/1A
-22°F
ft·lb/in²
  
73°F
ft·lb/in²
  
Hardness
Nominal Value
Unit
Test Method
Shore Hardness (Shore D, 15 sec, Compression Molded)
 
 ISO 868
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature (66 psi, Unannealed)
°F
 ISO 75-2/B
Vicat Softening Temperature
°F
 ISO 306/A
Melting Temperature
°F
 DIN 53765
Enthalpy Change
J/g
 DIN 53765
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: SABIC® HDPE B5421, SABIC HDPE B5421, SABIC® HDPE , SABIC HDPE, SABICHDPEB5421, SABICHDPE, HDPEB 5421, HDPEB5421, HDPE, B 5421, B5421, Polyethylene, High Density, Polyethylene High Density, Polyethylene, PE, SABIC, PolyethyleneHighDensity, 5421B, 5421HDPEB
Features
Features may also be described by the following terms: High Environmental Stress Cracking Resistance, High ESCR, Stress Cracking Resistant.
Notes
1Typical properties: these are not to be construed as specifications.
23 MPa
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.