IDES Prospector Already have an account? Login Here

IDES

SABIC® HDPE B5202

High Density Polyethylene

Supplied by Saudi Basic Industries Corporation (SABIC)

The technical datasheet with complete property values for SABIC® HDPE B5202 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
SABIC® HDPE B5202 is a material with a high molecular mass, supplied as pellets and developed for blow moulding of UN certified packaging(s). This grade is suitable for cans and containers in the range from 20 up until 220 litres and for sheet and profiles.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Features 
  • Good Processability
  • Good Stability
  • Good Stiffness
  • Good Toughness
  • High ESCR (Stress Crack Resist.)
  • High Purity
  • Med.-Wide Molecular Weight Distrib.
Uses 
  • Bottles
  • Containers
  • Profiles
  • Sheet
  • Tubing
Forms 
  • Pellets
Processing Method 
  • Blow Molding
  • Extrusion
  • Thermoforming
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR)
     ISO 1133
190°C/21.6 kg
g/10 min
  
190°C/5.0 kg
g/10 min
  
Environmental Stress-Cracking Resistance 2 (167°F, 0.0394 in, Rhodacal-DS10)
hr
 Internal Method
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus (73°F, 0.0787 in, Compression Molded)
psi
 ISO 527-2/1BA/50
Tensile Stress
     ISO 527-2/1BA/50
Yield, 73°F, 0.0787 in, Compression Molded
psi
  
Break, 73°F, 0.0787 in, Compression Molded
psi
  
Tensile Strain (Break, 73°F, 0.0787 in, Compression Molded)
%
 ISO 527-2/1BA/50
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact Strength
     ISO 180/A
-22°F
ft·lb/in²
  
73°F
ft·lb/in²
  
Hardness
Nominal Value
Unit
Test Method
Shore Hardness (Shore D, Compression Molded)
 
 ISO 868
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature (66 psi, Unannealed)
°F
 ISO 75-2/B
Vicat Softening Temperature
°F
 ISO 306/A50
Melting Temperature (DSC)
°F
 DIN 53765
Enthalpy Change
J/g
 DIN 53765
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: SABIC® HDPE B5202, SABIC HDPE B5202, SABIC® HDPE , SABIC HDPE, SABICHDPEB5202, SABICHDPE, HDPEB 5202, HDPEB5202, HDPE, B 5202, B5202, Polyethylene, High Density, Polyethylene High Density, Polyethylene, PE, SABIC, PolyethyleneHighDensity, 5202B, 5202HDPEB
Features
Features may also be described by the following terms: Good Toughness, Tough, Good Stiffness, Good Processability, Easy Processing, Medium Molecular Weight Distribution, Wide Molecular Weight Distribution, Medium MW Distribution, Wide MW Distribution, High Environmental Stress Cracking Resistance, High ESCR, Stress Cracking Resistant, High Purity, Good Stability.
Uses
Uses may also be described by the following terms: Tubing, Tube.
Notes
1Typical properties: these are not to be construed as specifications.
23 MPa
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.