|
Density
|
|
g/cm³
|
ISO 1183/A |
|
Melt Mass-Flow Rate (MFR)
|
|
|
ISO 1133 |
|
190°C/2.16 kg
|
|
g/10 min
|
|
|
190°C/21.6 kg
|
|
g/10 min
|
|
|
190°C/5.0 kg
|
|
g/10 min
|
|
|
Tensile Modulus (0.0787 in, Compression Molded)
|
|
psi
|
ISO 527-2/1BA/50 |
|
Tensile Stress
|
|
|
ISO 527-2/1BA/50 |
|
Yield, 0.0787 in, Compression Molded
|
|
psi
|
|
|
Break, 0.0787 in, Compression Molded
|
|
psi
|
|
|
Tensile Strain (Break, 0.0787 in, Compression Molded)
|
|
%
|
ISO 527-2/1BA/50 |
|
Notched Izod Impact Strength
|
|
|
ISO 180/1A |
|
-22°F
|
|
ft·lb/in²
|
|
|
73°F
|
|
ft·lb/in²
|
|
|
Shore Hardness (Shore D, Compression Molded)
|
|
|
ISO 868 |
|
Heat Deflection Temperature
|
|
|
|
|
66 psi, Unannealed
|
|
°F
|
ISO 75-2/B |
|
264 psi, Unannealed
|
|
°F
|
ISO 75-2/A |
|
Vicat Softening Temperature
|
|
|
|
|
--
|
|
°F
|
ISO 306/A50 |
|
--
|
|
°F
|
ISO 306/B50 |
|
Melting Temperature (DSC)
|
|
°F
|
ISO 3146 |
|
Tensile Strain at Break, ISO 527, Compression Molded, Type 1BA, 50mm/min, 2mm: >1000%
ESCR, SABIC Method, Compression Molded, Determined in Rhodacal-DS10 at 75°C, 3 N/mm², thickness 1mm: 13hr
The value listed as Melting Temperature (DSC) was actually tested according to DIN 53765.
Enthalpy Change, DIN 53765: 215 J/g
|
|
Product names can be difficult to match. You may have searched any one of these terms to find this product: SABIC® HDPE B5823, SABIC HDPE B5823, SABIC® HDPE , SABIC HDPE, SABICHDPEB5823, SABICHDPE, HDPEB 5823, HDPEB5823, HDPE, B 5823, B5823, Polyethylene, High Density, Polyethylene High Density, Polyethylene, PE, SABIC, PolyethyleneHighDensity, 5823B, 5823HDPEB
|
|
Features may also be described by the following terms: High Stiffness, Good Toughness, Tough, Good Processability, Easy Processing, Medium Molecular Weight Distribution, Wide Molecular Weight Distribution, Medium MW Distribution, Wide MW Distribution, High Environmental Stress Cracking Resistance, High ESCR, Stress Cracking Resistant, High Purity.
|
|
Uses may also be described by the following terms: Piping, Pipe.
|