IDES Prospector Already have an account? Login Here

IDES

SABIC® Vestolen A 6060R b

High Density Polyethylene

Supplied by Saudi Basic Industries Corporation (SABIC)

The technical datasheet with complete property values for SABIC® Vestolen A 6060R b is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Uses 
  • Containers
  • Piping
  • Sheet
Agency Ratings 
 
Appearance 
  • Blue
Forms 
  • Pellets
Processing Method 
  • Extrusion
  • Pipe Extrusion
  
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR)
     ISO 1133
190°C/2.16 kg
g/10 min
  
190°C/5.0 kg
g/10 min
  
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus (0.0787 in, Compression Molded)
psi
 ISO 527-2/1BA/50
Tensile Stress (Yield, 0.0787 in, Compression Molded)
psi
 ISO 527-2/1BA/50
Tensile Strain (Yield, 0.0787 in, Compression Molded)
%
 ISO 527-2/1BA/50
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength
     ISO 179/1eA
-22°F
ft·lb/in²
  
73°F
ft·lb/in²
  
Hardness
Nominal Value
Unit
Test Method
Shore Hardness (Shore D, 15 sec, Compression Molded)
 
 ISO 868
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature
      
66 psi, Unannealed
°F
 ISO 75-2/B
264 psi, Unannealed
°F
 ISO 75-2/A
Vicat Softening Temperature
°F
 ISO 306/B50
Additional Information
OIT 210°C, EN 728: >20 min
MRS Classification, ISO 12162: 10 MPa
Melting Point, SABIC Method, DSC: 124 to 128°C
RAL Number: 5005
Color Code: 65307
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: SABIC® Vestolen A 6060R b, SABIC Vestolen A 6060R b, SABIC® Vestolen A , SABIC Vestolen A, SABICVestolenA6060Rb, SABICVestolenA, A 6060 R b, A6060R b, A6060, 6060 R b, A6060Rb, 6060R b, 6060R, Rb, 6060Rb, Polyethylene, High Density, Polyethylene High Density, HDPE, Polyethylene, PE, SABIC, PolyethyleneHighDensity, R6060, 6060A
Uses
Uses may also be described by the following terms: Piping, Pipe.
Agency Ratings
This plastic material has 2 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): FDA (1), EEC (1).
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.