|
Density
|
|
g/cm³
|
ISO 1183/A |
|
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
|
|
g/10 min
|
ISO 1133 |
|
Coefficient of Friction (Blown Film)
|
|
|
ASTM D1894 |
|
Tensile Modulus
|
|
|
ISO 527-3 |
|
MD: 0.98 mil, Blown Film
|
|
psi
|
|
|
TD: 0.98 mil, Blown Film
|
|
psi
|
|
|
Tensile Stress
|
|
|
ISO 527-3 |
|
MD: Yield, 0.98 mil, Blown Film
|
|
psi
|
|
|
TD: Yield, 0.98 mil, Blown Film
|
|
psi
|
|
|
MD: 0.98 mil, Blown Film
|
|
psi
|
|
|
TD: 0.98 mil, Blown Film
|
|
psi
|
|
|
Tensile Elongation
|
|
|
ISO 527-3 |
|
MD: Break, 0.98 mil, Blown Film
|
|
%
|
|
|
TD: Break, 0.98 mil, Blown Film
|
|
%
|
|
|
Total Energy Impact (0.98 mil, Blown Film)
|
|
ft·lb
|
ASTM D4272 |
|
Elmendorf Tear Strength
|
|
|
ISO 6383-2 |
|
MD: 0.98 mil, Blown Film
|
|
lbf
|
|
|
TD: 0.98 mil, Blown Film
|
|
lbf
|
|
|
Gloss (45°, 0.984 mil, Blown Film)
|
|
|
ASTM D2457 |
|
Haze (0.984 mil, Blown Film)
|
|
%
|
ASTM D1003 |
|
25µm blown film processed with a blow up ratio of 3:1 and a die gap of 0.8 mm.
Clarity, SABIC Method, Blown Film, 25µm: 23mV
Blocking, SABIC Method, Blown Film: <5g
Re-blocking, SABIC Method, Blown Film: 100g
|
|
Product names can be difficult to match. You may have searched any one of these terms to find this product: SABIC® LDPE 2004TX37, SABIC LDPE 2004TX37, SABIC® LDPE , SABIC LDPE, SABICLDPE2004TX37, SABICLDPE, LDPE 2004 TX 37, LDPE2004TX37, LDPE2004, LDPE, 2004 TX 37, 2004TX37, 2004TX, TX37, Polyethylene, Low Density, Polyethylene Low Density, Polyethylene, PE, SABIC, PolyethyleneLowDensity, TX2004, 2004LDPE
|
|
Features may also be described by the following terms: High Slip, High Antiblocking, High Antiblock, Low Taste, Low Odor, High Clarity.
|
|
This plastic material has 2 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): FDA (1), EEC (1).
|