SABIC LDPE 2100TN21 SABIC Polyethylene, Low Density

Product Description

SABIC® LDPE 2100TN21 is a grade with excellent toughness and tear strength and outstanding shrink properties. The material contains anti block and slip erucamide, has a very low energy consumption during processing and has good draw down properties.

SABIC® LDPE 2100TN21 is suitable for application in shrinkhoods, industrial sacks, heavy duty carrier bags and liners.

General

Material Status

Commercial: Active

Availability

Europe

Additive

Antiblock (6500 ppm)

Slip (3000 ppm)

Features

Antiblocking

Good Drawdown

Good Tear Strength

Good Toughness

Slip

Uses

Film

Heavy-duty Bags

Liners

Forms

Pellets

Processing Method

Blown Film

Physical	Nominal Value	Unit	Test Method
Density		g/cm³	ISO 1183/A
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)		g/10 min	ISO 1133
Mechanical	Nominal Value	Unit	Test Method
Coefficient of Friction (Blown Film)			ASTM D1894
Films	Nominal Value	Unit	Test Method
Tensile Modulus			ISO 527-3
MD: 2.0 mil, Blown Film		psi
TD: 2.0 mil, Blown Film		psi
Tensile Stress			ISO 527-3
MD: Yield, 2.0 mil, Blown Film		psi
TD: Yield, 2.0 mil, Blown Film		psi
MD: 2.0 mil, Blown Film		psi
TD: 2.0 mil, Blown Film		psi
Tensile Elongation			ISO 527-3
MD: Break, 2.0 mil, Blown Film		%
TD: Break, 2.0 mil, Blown Film		%
Optical	Nominal Value	Unit	Test Method
Haze (1.97 mil, Blown Film)		%	ASTM D1003
Additional Information
50µm blown film processed with a blow up ratio of 3:1 and a die gap of 0.8 mm. Clarity, SABIC Method, Blown Film, 50µm: 50mV Blocking, SABIC Method, Blown Film: 10g Re-blocking, SABIC Method, Blown Film: 10g Impact Strength, ASTM D4272, 50µm, Blown Film: 30 kJ/m Tear Strength, ISO 6383-2, 50µm, Blown Film, TD: 25 kN/m Tear Strength, ISO 6383-2, 50µm, Blown Film, MD: 45 kN/m
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: SABIC® LDPE 2100TN21, SABIC LDPE 2100TN21, SABIC® LDPE , SABIC LDPE, SABICLDPE2100TN21, SABICLDPE, LDPE 2100 TN 21, LDPE2100TN21, LDPE2100, LDPE, 2100 TN 21, 2100TN21, 2100TN, TN21, Polyethylene, Low Density, Polyethylene Low Density, Polyethylene, PE, SABIC, PolyethyleneLowDensity, TN2100, 2100LDPE
Features
Features may also be described by the following terms: Antiblocking, Unspecified Antiblock, Slip, Unspecified Slip, Good Toughness, Tough, Good Tear Strength, Good Drawdown, Good draw down.
Uses
Uses may also be described by the following terms: Heavy-duty Bags, Heavy Duty Bags.

Notes

¹Typical properties: these are not to be construed as specifications.

SABIC® LDPE 2100TN21

Low Density Polyethylene

Supplied by Saudi Basic Industries Corporation (SABIC)