IDES Prospector Already have an account? Login Here

IDES

SABIC® LDPE 2200TC00

Low Density Polyethylene

Supplied by Saudi Basic Industries Corporation (SABIC)

The technical datasheet with complete property values for SABIC® LDPE 2200TC00 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
SABIC® LDPE 2200TC00 is a special grade with a low melt flow range and contains no additives.
This grade has an excellent draw down ability and very good optical properties, which is unusual for melt 0,3 grades.

SABIC® LDPE 2200TC00 is suitable for thin film applications combining high strength, high bundling force and good optical properties.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Features 
  • High Strength
  • Low Flow
  • Opticals
Uses 
  • Film
  • Shrink Wrap
  
Forms 
  • Pellets
Processing Method 
  • Blown Film
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183/A
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
g/10 min
 ISO 1133
Mechanical
Nominal Value
Unit
Test Method
Coefficient of Friction (Blown Film)
 
 ASTM D1894
Films
Nominal Value
Unit
Test Method
Film Thickness - Tested
mil
  
Tensile Modulus
     ISO 527-3
MD: 2.0 mil, Blown Film
psi
  
TD: 2.0 mil, Blown Film
psi
  
Tensile Stress
     ISO 527-3
MD: Yield, 2.0 mil, Blown Film
psi
  
TD: Yield, 2.0 mil, Blown Film
psi
  
MD: 2.0 mil, Blown Film
psi
  
TD: 2.0 mil, Blown Film
psi
  
Tensile Elongation
     ISO 527-3
MD: Break, 2.0 mil, Blown Film
%
  
TD: Break, 2.0 mil, Blown Film
%
  
Trouser Tear Resistance
     ISO 6383-1
MD
lbf/in
  
TD
lbf/in
  
Impact
Nominal Value
Unit
Test Method
Impact Resilience (2.0 mil)
ft·lb/in
 ASTM D4272
Thermal
Nominal Value
Unit
Test Method
Vicat Softening Temperature
°F
 ISO 306/A
Optical
Nominal Value
Unit
Test Method
Gloss (45°, 1.97 mil, Blown Film)
 
 ASTM D2457
Haze (1.97 mil, Blown Film)
%
 ASTM D1003
Clarity-Light Transmittance (2.0 mil)
V
  
Additional Information
Nominal Value
Unit
Test Method
Blocking
     Internal Method
2.0 mil
g
  
2.0 mil 2
g
  
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: SABIC® LDPE 2200TC00, SABIC LDPE 2200TC00, SABIC® LDPE , SABIC LDPE, SABICLDPE2200TC00, SABICLDPE, LDPE 2200 TC 00, LDPE2200TC00, LDPE2200, LDPE, 2200 TC 00, 2200TC00, 2200TC, TC00, Polyethylene, Low Density, Polyethylene Low Density, Polyethylene, PE, SABIC, PolyethyleneLowDensity, TC2200, 2200LDPE
Features
Features may also be described by the following terms: High Strength, Low Flow, Low Melt, Low MFI.
Uses
Uses may also be described by the following terms: Shrink Wrap.
Notes
1Typical properties: these are not to be construed as specifications.
2Reblocking
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.