IDES Prospector Already have an account? Login Here

IDES

SABIC® LDPE 2200TC12

Low Density Polyethylene

Supplied by Saudi Basic Industries Corporation (SABIC)

The technical datasheet with complete property values for SABIC® LDPE 2200TC12 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
SABIC® LDPE 2200TC12 is a special grade with a low melt flow rate and contains a low level of anti block and a medium level of slip agent (E=erucamide).
This grade has an excellent draw down ability and good optical properties, which is unusual for melt-0,3 grades.

SABIC® LDPE 2200TC12 is suitable for thin film applications requiring high strength, thin shrink film with high shrink forces and wrapping strength. The material is highly suitable for laminating and coextruded films.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Additive 
  • Antiblock (3300 ppm)
  • Slip (6000 ppm)
  
Features 
  • High Strength
  • Low Antiblocking
  • Low Flow
  • Medium Slip
  • Opticals
Uses 
  • Film
  • Laminates
  • Shrink Wrap
Forms 
  • Pellets
Processing Method 
  • Blown Film
  • Coextrusion
  
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183/A
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
g/10 min
 ISO 1133
Mechanical
Nominal Value
Unit
Test Method
Coefficient of Friction (Blown Film)
 
 ASTM D1894
Films
Nominal Value
Unit
Test Method
Tensile Modulus
     ISO 527-3
MD: 2.0 mil, Blown Film
psi
  
TD: 2.0 mil, Blown Film
psi
  
Tensile Stress
     ISO 527-3
MD: Yield, 2.0 mil, Blown Film
psi
  
TD: Yield, 2.0 mil, Blown Film
psi
  
MD: 2.0 mil, Blown Film
psi
  
TD: 2.0 mil, Blown Film
psi
  
Tensile Elongation
     ISO 527-3
MD: Break, 2.0 mil, Blown Film
%
  
TD: Break, 2.0 mil, Blown Film
%
  
Optical
Nominal Value
Unit
Test Method
Gloss (45°, 1.97 mil, Blown Film)
 
 ASTM D2457
Haze (1.97 mil, Blown Film)
%
 ASTM D1003
Additional Information
50µm blown film processed with a blow up ratio of 3:1 and a die gap of 0.8 mm.
Clarity, SABIC Method, Blown Film, 50µm: 27mV
Blocking, SABIC Method, Blown Film: 20g
Re-blocking, SABIC Method, Blown Film: <5g
Impact Strength, ASTM D4272, 50µm, Blown Film: 30 kJ/m
Tear Strength, ISO 6383-2, 50µm, Blown Film, TD: 40 kN/m
Tear Strength, ISO 6383-2, 50µm, Blown Film, MD: 35 kN/m
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: SABIC® LDPE 2200TC12, SABIC LDPE 2200TC12, SABIC® LDPE , SABIC LDPE, SABICLDPE2200TC12, SABICLDPE, LDPE 2200 TC 12, LDPE2200TC12, LDPE2200, LDPE, 2200 TC 12, 2200TC12, 2200TC, TC12, Polyethylene, Low Density, Polyethylene Low Density, Polyethylene, PE, SABIC, PolyethyleneLowDensity, TC2200, 2200LDPE
Features
Features may also be described by the following terms: Low Antiblocking, Low Antiblock, High Strength, Medium Slip, Low Flow, Low Melt, Low MFI.
Uses
Uses may also be described by the following terms: Shrink Wrap.
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.