|
Density
|
|
g/cm³
|
ISO 1183/A |
|
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
|
|
g/10 min
|
ISO 1133 |
|
Coefficient of Friction (Blown Film)
|
|
|
ASTM D1894 |
|
Tensile Modulus
|
|
|
ISO 527-3 |
|
MD: 0.98 mil, Cast Film
|
|
psi
|
|
|
TD: 0.98 mil, Cast Film
|
|
psi
|
|
|
MD: 1.8 mil, Blown Film
|
|
psi
|
|
|
TD: 1.8 mil, Blown Film
|
|
psi
|
|
|
Tensile Stress
|
|
|
ISO 527-3 |
|
MD: Yield, 0.98 mil, Cast Film
|
|
psi
|
|
|
TD: Yield, 0.98 mil, Cast Film
|
|
psi
|
|
|
MD: Yield, 1.8 mil, Blown Film
|
|
psi
|
|
|
TD: Yield, 1.8 mil, Blown Film
|
|
psi
|
|
|
MD: 0.98 mil, Cast Film
|
|
psi
|
|
|
TD: 0.98 mil, Cast Film
|
|
psi
|
|
|
MD: 1.8 mil, Blown Film
|
|
psi
|
|
|
TD: 1.8 mil, Blown Film
|
|
psi
|
|
|
Tensile Elongation
|
|
|
ISO 527-3 |
|
MD: Break, 0.98 mil, Cast Film
|
|
%
|
|
|
TD: Break, 0.98 mil, Cast Film
|
|
%
|
|
|
MD: Break, 1.8 mil, Blown Film
|
|
%
|
|
|
TD: Break, 1.8 mil, Blown Film
|
|
%
|
|
|
Total Energy Impact
|
|
|
ASTM D4272 |
|
0.98 mil, Cast Film
|
|
ft·lb
|
|
|
1.8 mil, Blown Film
|
|
ft·lb
|
|
|
Elmendorf Tear Strength
|
|
|
ISO 6383-2 |
|
MD: 1.8 mil, Blown Film
|
|
lbf
|
|
|
TD: 1.8 mil, Blown Film
|
|
lbf
|
|
|
Gloss
|
|
|
ASTM D2457 |
|
45°, 1.77 mil, Blown Film
|
|
|
|
|
45°, 0.984 mil, Cast Film
|
|
|
|
|
Haze
|
|
|
ASTM D1003 |
|
1.77 mil, Blown Film
|
|
%
|
|
|
0.984 mil, Cast Film
|
|
%
|
|
|
45µm blown film processed with a blow up ratio of 3:1 and a die gap of 0.8 mm.
25µm cast film processed with a die gap of 1.0 mm.
Clarity, SABIC Method, Blown Film, 45µm: 23mV
Clarity, SABIC Method, Cast Film, 25µm: 20mV
Blocking, SABIC Method, Blown Film: 10g
Re-blocking, SABIC Method, Blown Film: 70g
|
|
Product names can be difficult to match. You may have searched any one of these terms to find this product: SABIC® LDPE 2201TH12, SABIC LDPE 2201TH12, SABIC® LDPE , SABIC LDPE, SABICLDPE2201TH12, SABICLDPE, LDPE 2201 TH 12, LDPE2201TH12, LDPE2201, LDPE, 2201 TH 12, 2201TH12, 2201TH, TH12, Polyethylene, Low Density, Polyethylene Low Density, Polyethylene, PE, SABIC, PolyethyleneLowDensity, TH2201, 2201LDPE
|
|
Features may also be described by the following terms: Low Odor, Low Antiblocking, Low Antiblock, Good Processability, Easy Processing, Slip, Unspecified Slip, Low Taste, Good Drawdown, Good draw down, High Clarity.
|
|
Uses may also be described by the following terms: Cast Film.
|
|
This plastic material has 2 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): FDA (1), EEC (1).
|