IDES Prospector Already have an account? Login Here

IDES

SABIC® LDPE 2501TH00

Low Density Polyethylene

Supplied by Saudi Basic Industries Corporation (SABIC)

The technical datasheet with complete property values for SABIC® LDPE 2501TH00 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
SABIC® LDPE 2501TH00 is an additive free clarity grade, which combines excellent film processability with very good optical properties and stiffness.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Features 
  • Good Processability
  • Good Stiffness
  • High Clarity
  • Low to No Odor
  • Low to No Taste
  • Opticals
Uses 
  • Film
  • Laminates
  
Agency Ratings 
 
Forms 
  • Pellets
Processing Method 
  • Blown Film
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183/A
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
g/10 min
 ISO 1133
Mechanical
Nominal Value
Unit
Test Method
Coefficient of Friction (Blown Film)
 
 ASTM D1894
Films
Nominal Value
Unit
Test Method
Film Thickness - Tested
mil
  
Tensile Modulus
     ISO 527-3
MD: 2.0 mil, Blown Film
psi
  
TD: 2.0 mil, Blown Film
psi
  
Tensile Stress
     ISO 527-3
MD: Yield, 2.0 mil, Blown Film
psi
  
TD: Yield, 2.0 mil, Blown Film
psi
  
MD: 1.8 mil, Blown Film
psi
  
TD: 2.0 mil, Blown Film
psi
  
Tensile Elongation
     ISO 527-3
MD: Break, 2.0 mil, Blown Film
%
  
TD: Break, 2.0 mil, Blown Film
%
  
Total Energy Impact (2.0 mil, Blown Film)
ft·lb
 ASTM D4272
Elmendorf Tear Strength
     ISO 6383-2
MD: 1.8 mil, Blown Film
lbf
  
TD: 2.0 mil, Blown Film
lbf
  
Thermal
Nominal Value
Unit
Test Method
Vicat Softening Temperature
°F
 ASTM D1525 2
Optical
Nominal Value
Unit
Test Method
Gloss (45°, 1.97 mil, Blown Film)
 
 ASTM D2457
Haze (1.97 mil, Blown Film)
%
 ASTM D1003
Clarity
V
 Internal Method
Additional Information
Nominal Value
Unit
Test Method
Blocking
g
 Internal Method
Re-blocking
g
 Internal Method
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: SABIC® LDPE 2501TH00, SABIC LDPE 2501TH00, SABIC® LDPE , SABIC LDPE, SABICLDPE2501TH00, SABICLDPE, LDPE 2501 TH 00, LDPE2501TH00, LDPE2501, LDPE, 2501 TH 00, 2501TH00, 2501TH, TH00, Polyethylene, Low Density, Polyethylene Low Density, Polyethylene, PE, SABIC, PolyethyleneLowDensity, TH2501, 2501LDPE
Features
Features may also be described by the following terms: Low Odor, Low Taste, Good Stiffness, High Clarity, Good Processability, Easy Processing.
Agency Ratings
This plastic material has 2 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): FDA (1), EEC (1).
Notes
1Typical properties: these are not to be construed as specifications.
2Rate A (50°C/h)
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.