SABIC LDPE 2404AN00 SABIC Polyethylene, Low Density

Product Description

SABIC® LDPE 2404AN00 is an autoclave grade without additives. The material can be easily processed with minimum smoke development. The material is characterised by an optimal relationship between draw down and neck-in and excellent adhesion to various substrates.

General

Material Status

Commercial: Discontinued

Availability

Europe

Features

Additive Free

Autoclavable

Good Adhesion

Good Drawdown

Good Processability

Low Neck-In

Low Smoke Emission

Uses

Coating Applications

Forms

Pellets

Processing Method

Extrusion Coating

Film Extrusion

Physical	Nominal Value	Unit	Test Method
Density		g/cm³	ISO 1183/A
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)		g/10 min	ISO 1133
Mechanical	Nominal Value	Unit	Test Method
Tensile Stress			ISO 527-2/50
Yield, 0.0787 in, Compression Molded		psi
Break, 0.0787 in, Compression Molded		psi
Tensile Strain (Break, 0.0787 in, Compression Molded)		%	ISO 527-2/50
Films	Nominal Value	Unit	Test Method
Film Thickness - Tested		mil
Tensile Stress			ISO 527-3
MD: Yield, 0.98 mil		psi
TD: Yield, 0.98 mil		psi
MD: 0.98 mil		psi
TD: 0.98 mil		psi
Tensile Elongation			ISO 527-3
MD: Break, 0.98 mil		%
TD: Break, 0.98 mil		%
Oxygen Permeability (73°F, 0.98 mil, 0% RH)		cm³·mil/100in²/atm/24 hr	ISO 15105-2
Water Vapor Transmission Rate (100°F, 0.98 mil, 90% RH)		g/100 in²/24 hr	ISO 15106-3
Thermal	Nominal Value	Unit	Test Method
Vicat Softening Temperature		°F	ISO 306
Melting Temperature (DSC)		°F	DIN 53765
Enthalpy Change		J/g	DIN 53765
Additional Information	Nominal Value	Unit	Test Method
Tear Strength			ISO 6383-2
MD: 1.0 mil		lbf/in
TD: 1.0 mil		lbf/in
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: SABIC® LDPE 2404AN00, SABIC LDPE 2404AN00, SABIC® LDPE , SABIC LDPE, SABICLDPE2404AN00, SABICLDPE, LDPE 2404 AN 00, LDPE2404AN00, LDPE2404, LDPE, 2404 AN 00, 2404AN00, 2404AN, AN00, Polyethylene, Low Density, Polyethylene Low Density, Polyethylene, PE, SABIC, PolyethyleneLowDensity, AN2404, 2404LDPE
Features
Features may also be described by the following terms: Good Processability, Easy Processing, Good Adhesion, Low Neck-in, Low Neck In, Additive Free, No Additives, Low Smoke Emission, Good Drawdown, Good draw down, Autoclavable, Autoclave.

Notes

¹Typical properties: these are not to be construed as specifications.

SABIC® LDPE 2404AN00

Low Density Polyethylene

Supplied by Saudi Basic Industries Corporation (SABIC)