SABIC LDPE 1808AF00 SABIC Polyethylene, Low Density

Product Description

SABIC® LDPE 1808AF00 is an autoclave grade without additives. The material can be processed at high speeds, thanks to it's excellent draw down properties and superior web stability. The grade has a very low gel level.

General

Material Status

Commercial: Discontinued

Availability

Europe

Features

Good Drawdown

Uses

Coating Applications

Agency Ratings

Forms

Pellets

Processing Method

Extrusion Coating

Physical	Nominal Value	Unit	Test Method
Density		g/cm³	ISO 1183
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)		g/10 min	ISO 1133
Environmental Stress-Cracking Resistance² (140°F, 0.0787 in, Compression Molded)		hr	Internal Method
Mechanical	Nominal Value	Unit	Test Method
Tensile Stress			ISO 527-2/200
Yield, 0.0630 in, Compression Molded		psi
Break, 0.0630 in, Compression Molded		psi
Tensile Strain (Break, 0.0630 in, Compression Molded)		%	ISO 527-2/200
Films	Nominal Value	Unit	Test Method
Film Thickness - Tested		mil
Tensile Stress			ISO 527-3
MD: Yield, 0.98 mil		psi
TD: Yield, 0.98 mil		psi
MD: 0.98 mil		psi
TD: 0.98 mil		psi
Tensile Elongation			ISO 527-3
MD: Break, 0.98 mil		%
TD: Break, 0.98 mil		%
Water Vapor Transmission Rate (100°F, 0.98 mil, 100% RH)		g/100 in²/24 hr	Internal Method
Oxygen Permeability³ (73°F, 1.0 mil)		cm³/cm²/bar/24 hr	Internal Method
Thermal	Nominal Value	Unit	Test Method
Vicat Softening Temperature		°F	ISO 306
Melting Temperature (DSC)		°F	DIN 53765
Enthalpy Change		J/g	DIN 53765
Additional Information	Nominal Value	Unit	Test Method
Flexural Crack Resistance (1.0 mil)		cycles/10 holes	Internal Method
Tear Strength			ISO 6383-2
MD: 1.0 mil		lbf/in
TD: 1.0 mil		lbf/in
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: SABIC® LDPE 1808AF00, SABIC LDPE 1808AF00, SABIC® LDPE , SABIC LDPE, SABICLDPE1808AF00, SABICLDPE, LDPE 1808 AF 00, LDPE1808AF00, LDPE1808, LDPE, 1808 AF 00, 1808AF00, 1808AF, AF00, Polyethylene, Low Density, Polyethylene Low Density, Polyethylene, PE, SABIC, PolyethyleneLowDensity, AF1808, 1808LDPE
Features
Features may also be described by the following terms: Good Drawdown, Good draw down.
Agency Ratings
This plastic material has 2 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): FDA (1), EEC (1).

Notes

¹Typical properties: these are not to be construed as specifications.

²2 MPa

³0% RH

SABIC® LDPE 1808AF00

Low Density Polyethylene

Supplied by Saudi Basic Industries Corporation (SABIC)