IDES Prospector Already have an account? Login Here

IDES

SABIC® LLDPE 6821N

Linear Low Density Polyethylene

Supplied by Saudi Basic Industries Corporation (SABIC)

The technical datasheet with complete property values for SABIC® LLDPE 6821N is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Additive 
  • Antioxidant
Features 
  • Antioxidant
  • Food Contact Acceptable
  • Good Impact Resistance
  • Good Stiffness
  • Good Tear Strength
  • High Tensile Strength
Uses 
  • Agricultural Applications
  • Film
  • Food Packaging
  • Heavy-duty Bags
  • Laminates
  • Packaging
  • Stretch Wrap
Forms 
  • Pellets
Processing Method 
  • Blown Film
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
ISO 1183/A
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
g/10 min
ASTM D1238
Films
Nominal Value
Unit
Test Method
Film Thickness - Tested
mil
 
Secant Modulus
    ASTM D882
MD: 1.2 mil
psi
 
TD: 1.2 mil
psi
 
Tensile Strength
    ASTM D882
MD: Yield, 1.2 mil
psi
 
TD: Yield, 1.2 mil
psi
 
MD: Break, 1.2 mil
psi
 
TD: Break, 1.2 mil
psi
 
Tensile Elongation
    ASTM D882
MD: Break, 1.2 mil
%
 
TD: Break, 1.2 mil
%
 
Dart Drop Impact (1.2 mil, Blown Film)
g
ASTM D1709
Elmendorf Tear Strength
    ASTM D1922
MD: 1.2 mil
g
 
TD: 1.2 mil
g
 
Optical
Nominal Value
Unit
Test Method
Gloss (60°, 1.18 mil, Blown Film)
 
ASTM D2457
Haze (1.18 mil, Blown Film)
%
ASTM D1003
Additional Information
30µm blown film produced with a blow up ratio of 1:2.5.
Puncture Resistance, SABIC Method, 30µm, Blown Film: 70 J/mm
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: SABIC® LLDPE 6821N, SABIC LLDPE 6821N, SABIC® LLDPE , SABIC LLDPE, SABICLLDPE6821N, SABICLLDPE, LLDPE 6821 N, LLDPE6821N, LLDPE6821, LLDPE, 6821 N, 6821N, Polyethylene, Linear Low Density, Polyethylene Linear Low Density, Polyethylene, PE, SABIC, PolyethyleneLinearLowDensity, N6821, 6821LLDPE
Features
Features may also be described by the following terms: Good Tear Strength, High Tensile Strength, Good Stiffness, Good Impact Resistance.
Uses
Uses may also be described by the following terms: Stretch Wrap, Heavy-duty Bags, Heavy Duty Bags, Food Packaging.
Extrusion
Nominal Value
Unit
 
Melt Temperature
°F
 
Extrusion Notes
Blow-up ratio: 2:1 to 3:1
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.