IDES Prospector Already have an account? Login Here

IDES

SABIC® LLDPE 6821W

Linear Low Density Polyethylene

Supplied by Saudi Basic Industries Corporation (SABIC)

The technical datasheet with complete property values for SABIC® LLDPE 6821W is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Additive 
  • Antiblock
  • Antioxidant
  • Slip
Features 
  • Antiblocking
  • Antioxidant
  • Food Contact Acceptable
  • Good Impact Resistance
  • Good Stiffness
  • Good Tear Strength
  • High Tensile Strength
  • Slip
Uses 
  • Agricultural Applications
  • Film
  • Food Packaging
  • Heavy-duty Bags
  • Laminates
  • Packaging
  • Stretch Wrap
Forms 
  • Pellets
Processing Method 
  • Blown Film
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183/A
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
g/10 min
 ASTM D1238
Films
Nominal Value
Unit
Test Method
Film Thickness - Tested
mil
  
Secant Modulus
     ASTM D882
MD: 1.2 mil
psi
  
TD: 1.2 mil
psi
  
Tensile Strength
     ASTM D882
MD: Yield, 1.2 mil
psi
  
TD: Yield, 1.2 mil
psi
  
MD: Break, 1.2 mil
psi
  
TD: Break, 1.2 mil
psi
  
Tensile Elongation
     ASTM D882
MD: Break, 1.2 mil
%
  
TD: Break, 1.2 mil
%
  
Dart Drop Impact (1.2 mil, Blown Film)
g
 ASTM D1709
Elmendorf Tear Strength
     ASTM D1922
MD: 1.2 mil
g
  
TD: 1.2 mil
g
  
Optical
Nominal Value
Unit
Test Method
Gloss (60°, 1.18 mil, Blown Film)
 
 ASTM D2457
Haze (1.18 mil, Blown Film)
%
 ASTM D1003
Additional Information
30µm blown film produced with a blow up ratio of 1:2.5.
The film properties are measured on a similar grade without slip agent, antiblock and processing aid (PPA).
Puncture Resistance, SABIC Method, 30µm, Blown Film: 70 J/mm
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: SABIC® LLDPE 6821W, SABIC LLDPE 6821W, SABIC® LLDPE , SABIC LLDPE, SABICLLDPE6821W, SABICLLDPE, LLDPE 6821 W, LLDPE6821W, LLDPE6821, LLDPE, 6821 W, 6821W, Polyethylene, Linear Low Density, Polyethylene Linear Low Density, Polyethylene, PE, SABIC, PolyethyleneLinearLowDensity, W6821, 6821LLDPE
Features
Features may also be described by the following terms: Good Tear Strength, Good Stiffness, Slip, Unspecified Slip, Good Impact Resistance, High Tensile Strength, Antiblocking, Unspecified Antiblock.
Uses
Uses may also be described by the following terms: Stretch Wrap, Heavy-duty Bags, Heavy Duty Bags, Food Packaging.
Extrusion
Nominal Value
Unit
 
Melt Temperature
°F
  
Extrusion Notes
Blow-up ratio: 2:1 to 3:1
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.