IDES Prospector Already have an account? Login Here

IDES

SABIC® LLDPE 0132HS00

Linear Low Density Polyethylene

Supplied by Saudi Basic Industries Corporation (SABIC)

The technical datasheet with complete property values for SABIC® LLDPE 0132HS00 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
SABIC® LLDPE 0132HS00 is a medium density grade especially developed for the application in high demanding extrusion segments like e.g. sheet and more specific geo-membranes.

The grade is a hexene-1 copolymer combining excellent extrusion performance, mechanical properties and ESCR with low migration figures because of the increased density compared to LLDPE grades.

The product mentioned herein is in particular not tested and therefore not validated for use in pharmaceutical/medical applications.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Features 
  • Hexene Comonomer
  • High ESCR (Stress Crack Resist.)
  • Low to No Migration
  • Medium Density
  
Uses 
  • Geo Membranes
  • Piping
  • Sheet
Agency Ratings 
 
Appearance 
  • Natural Color
Forms 
  • Pellets
Processing Method 
  • Extrusion
  • Pipe Extrusion
  • Sheet Extrusion
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR)
     ISO 1133
190°C/2.16 kg
g/10 min
  
190°C/5.0 kg
g/10 min
  
Color
 
  
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus (0.0630 in, Compression Molded)
psi
 ISO 527-2/200
Tensile Stress (Yield, 0.0630 in, Compression Molded)
psi
 ISO 527-2/200
Tensile Strain
     ISO 527-2/200
Yield, 0.0630 in, Compression Molded
%
  
Break, 0.0630 in, Compression Molded
%
  
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength
     ISO 179/1eA
-22°F
ft·lb/in²
  
73°F
ft·lb/in²
  
Hardness
Nominal Value
Unit
Test Method
Shore Hardness (Shore D, 15 sec, Compression Molded)
 
 ISO 868
Thermal
Nominal Value
Unit
Test Method
Vicat Softening Temperature
°F
 ISO 306/B
Melting Temperature (DSC)
°F
 DIN 53765
Oxidation Induction Time (410°F)
min
 EN 728
Additional Information
Nominal Value
Unit
Test Method
Notched Constant Tensile Load 2 (140°F)
 
 ASTM D5397
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: SABIC® LLDPE 0132HS00, SABIC LLDPE 0132HS00, SABIC® LLDPE , SABIC LLDPE, SABICLLDPE0132HS00, SABICLLDPE, LLDPE 0132 HS 00, LLDPE0132HS00, LLDPE0132, LLDPE, 0132 HS 00, 0132HS00, 0132HS, HS00, Polyethylene, Linear Low Density, Polyethylene Linear Low Density, Polyethylene, PE, SABIC, PolyethyleneLinearLowDensity, HS0132, 0132LLDPE
Features
Features may also be described by the following terms: Low Migration, High Environmental Stress Cracking Resistance, High ESCR, Stress Cracking Resistant, Hexene Comonomer, Medium Density, Medium Specific Gravity.
Uses
Uses may also be described by the following terms: Geomembranes, Geo Membranes, Piping, Pipe.
Agency Ratings
This plastic material has 2 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): FDA (1), EEC (1).
Notes
1Typical properties: these are not to be construed as specifications.
25 MPa, 2% Surfactant
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.