IDES Prospector Already have an account? Login Here

IDES

ASI POLYPROPYLENE 1667-01

Polypropylene Homopolymer

Supplied by A. Schulman Inc.

The technical datasheet with complete property values for ASI POLYPROPYLENE 1667-01 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
PP 1667-01 is an easy flowing natural homopolymer polypropylene. It is for injection molding large parts with thin sections requiring good stiffness, heat resistance, and chemical resistance. This product is compliance with the FDA requirements of 21 CFR 177.1520.
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
  • North America
  
Features 
  • Food Contact Acceptable
  • Good Chemical Resistance
  • Good Flow
  • Good Stiffness
  • High Heat Resistance
  • Homopolymer
Uses 
  • Thin-walled Parts
Agency Ratings 
Appearance 
  • Natural Color
Forms 
  • Pellets
Processing Method 
  • Compounding
  • Injection Molding
  
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)
g/10 min
 ASTM D1238
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength 2 (Break)
psi
 ASTM D638
Tensile Elongation (Break)
%
 ASTM D638
Flexural Modulus
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact
ft·lb/in
 ASTM D256
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load
     ASTM D648
66 psi, Unannealed
°F
  
264 psi, Unannealed
°F
  
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: ASI POLYPROPYLENE 1667-01, ASI POLYPROPYLENE 166701, ASI POLYPROPYLENE , ASIPOLYPROPYLENE166701, ASIPOLYPROPYLENE, POLYPROPYLENE 1667 01, POLYPROPYLENE 1667, 1667, POLYPROPYLENE1667-01, POLYPROPYLENE166701, POLYPROPYLENE1667:01, POLYPROPYLENE1667/01, POLYPROPYLENE1667+01, POLYPROPYLENE1667_01, POLYPROPYLENE1667 01, POLYPROPYLENE1667, 1667-01, 166701, 1667:01, 1667/01, 1667+01, 1667_01, 1667 01, Polypropylene Homopolymer, PP Homopolymer, Polypropylene, PP, A. Schulman, PolypropyleneHomopolymer, PPHomopolymer, 011667, 1667POLYPROPYLENE
Features
Features may also be described by the following terms: Good Flow, High Heat Resistance, Good Stiffness, Good Chemical Resistance, Chemical Resistant.
Uses
Uses may also be described by the following terms: Thin-walled Parts, Thin Walled Parts, Thin-wall Parts, Thin wall Parts, Thinwall Parts.
Agency Ratings
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): FDA (1).
Notes
1Typical properties: these are not to be construed as specifications.
22.0 in/min
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.