RAMAPET S3 Indorama Polyethylene Terephthalate

Product Description

RAMAPET S3 is a specialty product. The resin is a very high intrinsic viscosity PET copolymer. Suitable for strapping and also suggested for extrusion blow molding.

General

Material Status

Commercial: Active

Availability

Asia Pacific

Europe

North America

Features

Copolymer

Food Contact Acceptable

High Viscosity

Uses

Blow Molding Applications

Food Packaging

Strapping

Agency Ratings

Forms

Pellets

Processing Method

Injection Molding

Stretch Blow Molding

Physical	Nominal Value	Unit	Test Method
Melt Mass-Flow Rate (MFR) (277°C/2.16 kg)		g/10 min	ASTM D1238
Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus		psi	ASTM D638
Tensile Strength		psi	ASTM D638
Tensile Elongation			ASTM D638
Yield		%
Break		%
Flexural Modulus		psi	ASTM D790
Flexural Strength		psi	ASTM D790
Thermal	Nominal Value	Unit	Test Method
Melting Temperature		°F	DSC
Additional Information
Intrinsic Viscosity, Ubbelohde Viscometer: 0.90 to 0.96 dl/gm Acetaldehyde, Gas Chromatograph: 1 ppm max Color B, Minolta Chromameter: -1.5 Crystallinity, Density Gradient Column: 50 min Moisture Content, Gravimetric Method: 0.2 max COOH Groups, Acid-Base Titration: 27 eq/ton max Chips/gm, Weighment Method: 60 pieces
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: RAMAPET® S3, RAMAPET S3, RAMAPET® , RAMAPET, RAMAPETS3, S 3, S3, Polyethylene Terephthalate, PET, Polyester, Indorama, PolyethyleneTerephthalate, 3S
Features
Features may also be described by the following terms: High Viscosity.
Uses
Uses may also be described by the following terms: Food Packaging.
Agency Ratings
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): FDA (1).

Notes

¹Typical properties: these are not to be construed as specifications.

RAMAPET® S3

Polyethylene Terephthalate

Supplied by Indorama Thailand