IDES Prospector Already have an account? Login Here

IDES

ASI POLYETHYLENE LP 502-01

High Density (HMW) Polyethylene

Supplied by A. Schulman Inc.

The technical datasheet with complete property values for ASI POLYETHYLENE LP 502-01 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
LP 502-01 Natural is a high molecular weight, high-density polyethylene copolymer, designed for blow molding of large parts where the finished product demands outstanding physical performance. This material has excellent processability and balanced end-use properties such as environmental stress crack resistance with superior impact.
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
  • North America
  
Features 
  • Copolymer
  • Good Impact Resistance
  • Good Processability
  • High ESCR (Stress Crack Resist.)
  • High Molecular Weight
Uses 
  • Blow Molding Applications
Appearance 
  • Natural Color
Forms 
  • Pellets
Processing Method 
  • Blow Molding
  • Extrusion
  • Thermoforming
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ASTM D1505
Melt Mass-Flow Rate (MFR) (190°C/21.6 kg)
g/10 min
 ASTM D1238
Environmental Stress-Cracking Resistance (F50)
hr
 ASTM D1693A
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength 2 (Yield)
psi
 ASTM D638
Tensile Elongation 2 (Break)
%
 ASTM D638
Flexural Modulus - Tangent
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact (73°F)
ft·lb/in
 ASTM D256
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness (Shore D)
 
 ASTM D2240
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load (66 psi, Unannealed)
°F
 ASTM D648
Brittleness Temperature
°F
 ASTM D746
Vicat Softening Temperature
°F
 ASTM D1525
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: ASI POLYETHYLENE LP 502-01, ASI POLYETHYLENE LP 50201, ASI POLYETHYLENE , ASIPOLYETHYLENELP50201, ASIPOLYETHYLENE, LP 502, POLYETHYLENELP 502-01, POLYETHYLENELP 50201, POLYETHYLENELP 502:01, POLYETHYLENELP 502/01, POLYETHYLENELP 502+01, POLYETHYLENELP 502_01, POLYETHYLENELP 502 01, POLYETHYLENELP502, POLYETHYLENELP 502, POLYETHYLENELP50201, LP 502-01, LP 50201, LP 502:01, LP 502/01, LP 502+01, LP 502_01, LP 502 01, LP502, 50201, POLYETHYLENELP502_01, LP50201, Polyethylene, High Density, Polyethylene High Density, LP502_01, Polyethylene, High Density (HMW), Polyethylene High Density HMW, HDPE, HMW, HDPE HMW, Polyethylene, PE, A. Schulman, PolyethyleneHighDensityHMW, HDPEHMW, 502LP, 502POLYETHYLENELP
Features
Features may also be described by the following terms: Good Processability, Easy Processing, Good Impact Resistance, High Environmental Stress Cracking Resistance, High ESCR, Stress Cracking Resistant, High Molecular Weight, High MW.
Notes
1Typical properties: these are not to be construed as specifications.
22.0 in/min
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.