IDES Prospector Already have an account? Login Here

IDES

ASI POLYETHYLENE CP 814-01

Linear Low Density Polyethylene

Supplied by A. Schulman Inc.

The technical datasheet with complete property values for ASI POLYETHYLENE CP 814-01 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
CP 814-01 Natural is a linear low-density polyethylene resin with excellent molding characteristics and good low temperature impact. This product meets the specifications contained in FDA Regulation CFR 177.1520, (c) 2.1.
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
  • North America
  
Features 
  • Good Moldability
  • Good Processability
  • Low Temperature Impact Resistance
Agency Ratings 
Appearance 
  • Natural Color
Forms 
  • Pellets
Processing Method 
  • Compounding
  • Injection Molding
  
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
g/10 min
 ASTM D1238
Environmental Stress-Cracking Resistance (F50)
hr
 ASTM D1693C
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength 2 (Yield)
psi
 ASTM D638
Tensile Elongation 2 (Break)
%
 ASTM D638
Flexural Modulus - 1% Secant
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Gardner Impact (104°F)
in·lb
 ASTM D5420
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness (Shore D)
 
 ASTM D2240
Thermal
Nominal Value
Unit
Test Method
Brittleness Temperature
°F
 ASTM D746
Melting Temperature
°F
  
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: ASI POLYETHYLENE CP 814-01, ASI POLYETHYLENE CP 81401, ASI POLYETHYLENE , ASIPOLYETHYLENECP81401, ASIPOLYETHYLENE, CP 814, POLYETHYLENECP 814-01, POLYETHYLENECP 81401, POLYETHYLENECP 814:01, POLYETHYLENECP 814/01, POLYETHYLENECP 814+01, POLYETHYLENECP 814_01, POLYETHYLENECP 814 01, POLYETHYLENECP814, POLYETHYLENECP 814, POLYETHYLENECP81401, CP 814-01, CP 81401, CP 814:01, CP 814/01, CP 814+01, CP 814_01, CP 814 01, CP814, 81401, POLYETHYLENECP814_01, CP81401, CP814_01, Polyethylene, Linear Low Density, Polyethylene Linear Low Density, LLDPE, Polyethylene, PE, A. Schulman, PolyethyleneLinearLowDensity, 814CP, 814POLYETHYLENECP
Features
Features may also be described by the following terms: Good Processability, Easy Processing, Low Temperatuer Impact Resistance, Low Temp Impact Resistance, Good Moldability.
Agency Ratings
This plastic material has 1 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): FDA (1).
Notes
1Typical properties: these are not to be construed as specifications.
22.0 in/min
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.