IDES Prospector Already have an account? Login Here

IDES

Aquathene® FR409800

Polyethylene

Supplied by LyondellBasell Industries

The technical datasheet with complete property values for Aquathene® FR409800 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
AQUATHENE FR 4098-00 is a colorable flame retardant masterbatch designed specifically for moisture cure applications. When FR 4098-00 is combined with AQ 120-000 and CM 04482 in the correct ratio this formulation is suitable for use in 600-V power cable and control cable applications where UL44 horizontal flame rating and 90°C service in wet locations are required. When melt blended using 30 wt.% FR 4098-00, 5 wt.% CM 04482 and 65 wt.% AQ 120-000, this formulation is designed to meet the following UL requirements: SIS, XHHW, XHHW-2, RHH, RHW, RHW-2, USE and USE-2.
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
  • Europe
  • North America
  • South America
  
Additive 
  • Flame Retardant
Features 
  • Flame Retardant
Uses 
  • Blending
  • Wire & Cable Applications
  
Forms 
  • Pellets
Processing Method 
  • Extrusion
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ASTM D1505
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
g/10 min
 ASTM D1238
Related Terminology
This supplier and product may also be known by these terms: LyondellBasell Industries, Lyondell, Basell, Bassell, Basell Polyolefins, Bassel

Product names can be difficult to match. You may have searched any one of these terms to find this product: Aquathene® FR409800, Aquathene FR409800, Aquathene® , Aquathene, AquatheneFR409800, FR 409800, FR409800, Polyethylene, Unspecified, Polyethylene Unspecified, PE, Unspecified, PE Unspecified, Polyethylene, PE, LyondellBasell, PolyethyleneUnspecified, PEUnspecified, 409800FR
Uses
Uses may also be described by the following terms: Wire and Cable Applications, Wire & Cable Applications.
Extrusion
Nominal Value
Unit
 
Cylinder Zone 1 Temp.
°F
  
Cylinder Zone 2 Temp.
°F
  
Cylinder Zone 3 Temp.
°F
  
Cylinder Zone 4 Temp.
°F
  
Adapter Temperature
°F
  
Die Temperature
°F
  
Extrusion Notes
Wire Preheat: 220°F
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.