IDES Prospector Already have an account? Login Here

IDES

RELENE® M60200

High Density Polyethylene

Supplied by Reliance Industries Limited

The technical datasheet with complete property values for RELENE® M60200 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
M60200 is a High Density Polyethylene (HDPE) grade designed for injection moulding applications. M60200 is suitable for moulding of houseware and commodities. Due to narrow molecular weight distribution of resin, articles exhibit excellent gloss. The resin also imparts good rigidity, stiffness, impact resistance coupled with good melt flow properties required for mould filling of large articles.
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
Features 
  • Food Contact Acceptable
  • Good Impact Resistance
  • Good Stiffness
  • High Gloss
  • Narrow Molecular Weight Distribution
Uses 
  • Household Goods
Agency Ratings 
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ASTM D1505
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
g/10 min
 ASTM D1238
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength (Yield, Injection Molded)
psi
 ASTM D638
Tensile Elongation (Yield, Injection Molded)
%
 ASTM D638
Flexural Modulus (Injection Molded)
psi
 ASTM D790
Flexural Strength (Yield, Injection Molded)
psi
 ASTM D790
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness (Shore D, Injection Molded)
 
 ASTM D2240
Thermal
Nominal Value
Unit
Test Method
Vicat Softening Temperature
°F
 ASTM D1525
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: RELENE® M60200, RELENE M60200, RELENE® , RELENE, RELENEM60200, M 60200, M60200, Polyethylene, High Density, Polyethylene High Density, HDPE, Polyethylene, PE, Reliance, PolyethyleneHighDensity, 60200M
Features
Features may also be described by the following terms: Narrow Molecular Weight Distribution, Narrow MW Distribution, High Gloss, Good Stiffness, Good Impact Resistance.
Uses
Uses may also be described by the following terms: Household Goods, Housewares.
Agency Ratings
This plastic material has 3 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): FDA (1), IS (2).
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.