IDES Prospector Already have an account? Login Here

IDES

RELENE® E 41003

High Density Polyethylene

Supplied by Reliance Industries Limited

The technical datasheet with complete property values for RELENE® E 41003 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Relene E 41003 is a High Density Polyethylene grade with broad molecular weight distribution and good melt strength, suitable for making pipes for water supply, irrigation, sewage and industrial effluent as per IS 4984:1995, IS 14151:1995 and IS 14333:1996 respectively. The designation for Relene E 41003 as per IS 7328:1992 is PEEAA-45-T-012.
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
Features 
  • Med.-Wide Molecular Weight Distrib.
Uses 
  • Industrial Applications
  • Piping
  
Forms 
  • Pellets
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ASTM D1505
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
g/10 min
 ASTM D1238
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength
     ASTM D638
Yield, Injection Molded
psi
  
Ultimate, Injection Molded
psi
  
Tensile Elongation (Break, Injection Molded)
%
 ASTM D638
Flexural Modulus (Injection Molded)
psi
 ASTM D790
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness (Shore D, Injection Molded)
 
 ASTM D2240
Thermal
Nominal Value
Unit
Test Method
Vicat Softening Temperature
°F
 ASTM D1525
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: RELENE® E 41003, RELENE E 41003, RELENE® , RELENE, RELENEE41003, E 41003, E41003, Polyethylene, High Density, Polyethylene High Density, HDPE, Polyethylene, PE, Reliance, PolyethyleneHighDensity, 41003E
Features
Features may also be described by the following terms: Medium Molecular Weight Distribution, Wide Molecular Weight Distribution, Medium MW Distribution, Wide MW Distribution.
Uses
Uses may also be described by the following terms: Piping, Pipe.
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.