IDES Prospector Already have an account? Login Here

IDES

RELENE® C 31101

High Density Polyethylene

Supplied by Reliance Industries Limited

The technical datasheet with complete property values for RELENE® C 31101 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Relene C 31101 is a black high density polyethylene compound for coating of metal pipes. It contains minimum 2% well dispersed, fine particle size carbon black in order to ensure excellent weathering resistance. Relene C 31101 offers excellent processability and adhesion characteristics.
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
Additive 
  • Carbon Black (20000 ppm)
Features 
  • Good Adhesion
  • Good Weather Resistance
  
Uses 
  • Pipe Coatings
Appearance 
  • Black
Forms 
  • Pellets
Processing Method 
  • Extrusion Coating
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ASTM D1505
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
g/10 min
 ASTM D1238
Environmental Stress-Cracking Resistance (Compression Molded, F50)
hr
 ASTM D1693
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength
     ASTM D638
Yield, Compression Molded
psi
  
Break, Compression Molded
psi
  
Tensile Elongation (Break, Compression Molded)
%
 ASTM D638
Flexural Modulus (Compression Molded)
psi
 ASTM D790
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness (Shore D, Compression Molded)
 
 ASTM D2240
Thermal
Nominal Value
Unit
Test Method
Brittleness Temperature
°F
 ASTM D746
Vicat Softening Temperature
°F
 ASTM D1525
Electrical
Nominal Value
Unit
Test Method
Volume Resistivity
ohm·cm
 ASTM D257
Dielectric Strength
V/mil
 ASTM D149
Dielectric Constant
 
 ASTM D150
Dissipation Factor
 
 ASTM D150
Additional Information
Oxidation Induction Time, ASTM D3895: >65 min
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: RELENE® C 31101, RELENE C 31101, RELENE® , RELENE, RELENEC31101, C 31101, C31101, Polyethylene, High Density, Polyethylene High Density, HDPE, Polyethylene, PE, Reliance, PolyethyleneHighDensity, 31101C
Features
Features may also be described by the following terms: Good Weather Resistance, Weather Resistant, Good Adhesion.
Uses
Uses may also be described by the following terms: Pipe Coatings, Pipe Coating.
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.