IDES Prospector Already have an account? Login Here

IDES

RELENE® E24065

Linear Low Density Polyethylene

Supplied by Reliance Industries Limited

The technical datasheet with complete property values for RELENE® E24065 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
E24065, is a butene comonomer based Linear Low Density Polyethylene. This grade is designed for extrusion coating applications. It offers excellent sealing properties, ESCR, tear strength and abrasion resistance in thin extrusion coatings.
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
Features 
  • Butene Comonomer
  • Food Contact Acceptable
  • Good Abrasion Resistance
  • Good Tear Strength
  • High ESCR (Stress Crack Resist.)
Uses 
  • Fabric Coatings
  • Foil Coatings
  • Paper Coatings
Agency Ratings 
Processing Method 
  • Extrusion Coating
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ASTM D1505
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
g/10 min
 ASTM D1238
Mechanical
Nominal Value
Unit
Test Method
Coefficient of Friction     ASTM D1894
vs. Itself - Dynamic, Blown Film
 
  
vs. Itself - Static, Blown Film
 
  
Films
Nominal Value
Unit
Test Method
Tensile Strength     ASTM D882
MD: Yield, 1.6 mil, Blown Film
psi
  
TD: Yield, 1.6 mil, Blown Film
psi
  
MD: Break, 1.6 mil, Blown Film
psi
  
TD: Break, 1.6 mil, Blown Film
psi
  
Tensile Elongation     ASTM D882
MD: Break, 1.6 mil, Blown Film
%
  
TD: Break, 1.6 mil, Blown Film
%
  
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: RELENE® E24065, RELENE E24065, RELENE® , RELENE, RELENEE24065, E 24065, E24065, Polyethylene, Linear Low Density, Polyethylene Linear Low Density, LLDPE, Polyethylene, PE, Reliance, PolyethyleneLinearLowDensity, 24065E
Features
Features may also be described by the following terms: Butene Comonomer, High Environmental Stress Cracking Resistance, High ESCR, Stress Cracking Resistant, Good Tear Strength, Good Abrasion Resistance, Abrasion Resistant.
Uses
Uses may also be described by the following terms: Fabric Coatings, Fabric Coating, Paper Coatings, Paper Coating, Foil Coatings, Foil Coating.
Agency Ratings
This plastic material has 3 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): IS (2), FDA (1).
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.