IDES Prospector Already have an account? Login Here

IDES

Elasthane™ 80A

Thermoplastic Polyurethane Elastomer (Polyether)

Supplied by DSM PTG

The technical datasheet with complete property values for Elasthane™ 80A is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Features 
  • Aromatic
  • Biocompatible
  • High Strength
  • Hydrolytically Stable
  
Uses 
  • Medical/Healthcare Applications
Agency Ratings 
 
Appearance 
  • Clear Amber
Forms 
  • Pellets
Processing Method 
  • Extrusion
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Melt Mass-Flow Rate (MFR) (224°C/1.2 kg)
g/10 min
 ASTM D1238
Molding Shrinkage - Flow
     ASTM D955
-- 2
in/in
  
-- 3
in/in
  
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength (Ultimate)
psi
 ASTM D1708
Tensile Stress
     ASTM D1708
50% Strain
psi
  
100% Strain
psi
  
300% Strain
psi
  
Tensile Elongation (Break)
%
 ASTM D1708
Flexural Modulus - 1% Secant
psi
 ASTM D790
Flexural Strength (5.0% Strain)
psi
 ASTM D790
Elastomers
Nominal Value
Unit
Test Method
Compression Set (77°F, 22.0 hr)
%
 ASTM D395
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness (Shore A)
 
 ASTM D2240
Thermal
Nominal Value
Unit
Test Method
Vicat Softening Temperature
°F
 ASTM D1525
CLTE - Flow
in/in/°F
 ASTM E831
Electrical
Nominal Value
Unit
Test Method
Dielectric Strength
V/mil
 ASTM D149
Dielectric Constant (60 Hz)
 
 ASTM D150
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Elasthane™ 80A, Elasthane 80A, Elasthane™ , Elasthane, Elasthane80A, 80 A, 80A, Thermoplastic Polyurethane Elastomer, Thermoplastic Polyurethane Elastomer (Polyether), Thermoplastic Polyurethane Elastomer Polyether, TPU-Polyether, TPUPolyether, TPU:Polyether, TPU/Polyether, TPU+Polyether, TPU_Polyether, TPU Polyether, Thermoplastic Polyurethane, TPU, DSM PTG, ThermoplasticPolyurethaneElastomerPolyether, ThermoplasticPolyurethane, A80
Features
Features may also be described by the following terms: High Strength.
Uses
Uses may also be described by the following terms: Medical Applications.
Agency Ratings
This plastic material has 2 certifications from the following agencies (the number in parentheses shows the number of certifications for that agency): DMF (1), FDA (1).
Extrusion
Nominal Value
Unit
 
Melt Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
24 in disk
3Flame bar
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.