IDES Prospector Already have an account? Login Here

IDES

PTS PCA-30G11-(V)

Polycarbonate + PBT

Glass Fiber Reinforcement, 11%

Supplied by Polymer Technology and Services, LLC

The technical datasheet with complete property values for PTS PCA-30G11-(V) is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Filler / Reinforcement 
  • Glass Fiber Reinforcement, 11% Filler by Weight
Additive 
  • UV Stabilizer
Features 
  • Good UV Resistance
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
ASTM D792
Melt Mass-Flow Rate (MFR) (250°C/5.0 kg)
g/10 min
ASTM D1238
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength (Yield, 0.125 in)
psi
ASTM D638
Tensile Elongation (Break, 0.125 in)
%
ASTM D638
Flexural Modulus (0.125 in)
psi
ASTM D790
Flexural Strength (Yield, 0.125 in)
psi
ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact (0.125 in)
ft·lb/in
ASTM D256
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load (264 psi, Unannealed)
°F
ASTM D648
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL (0.0620 in)
 
UL 94
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: PTS PCA-30G11-, PTS PCA 30G11, PTS PCA-30G11-(V), PTS PCA30G11V, PTS , PTSPCA30G11V, PCA 30 G 11, PCA30G11, PCA, PCA-30G11-, PCA 30G11, PCA 30 G 11 V, PCA-30G11-(V), PCA30G11V, PCA:30G11:(V), PCA:30G11:, PCA/30G11/(V), PCA/30G11/, PCA+30G11+(V), PCA+30G11+, PCA_30G11_(V), PCA_30G11_, PCA 30G11 (V), PCA30, 30G, G11, 11V, PCA_30G11_V, PCA 30G11 V, Polycarbonate + PBT, Polycarbonate PBT, Polycarbonate : PBT, Polycarbonate / PBT, Polycarbonate - PBT, Polycarbonate _ PBT, Polycarbonate PBT, PC+PBT, PCPBT, PC:PBT, PC/PBT, PC-PBT, PC_PBT, PC PBT, Polycarbonate, PC, Polymer Tech, PolycarbonatePBT, Polycarbonate_PBT, 30PCA
Features
Features may also be described by the following terms: Good UV Resistance, UV Resistant, Ultraviolet Resistant, Ultraviolet Light Resistant.
Injection
Nominal Value
Unit
 
Drying Temperature
°F
 
Drying Time
hr
 
Drying Time, Maximum
hr
 
Suggested Shot Size
%
 
Rear Temperature
°F
 
Middle Temperature
°F
 
Front Temperature
°F
 
Nozzle Temperature
°F
 
Processing (Melt) Temp
°F
 
Mold Temperature
°F
 
Injection Pressure
psi
 
Back Pressure
psi
 
Screw Speed
rpm
 
Vent Depth
in
 
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.