IDES Prospector Already have an account? Login Here

IDES

ALCUDIA® CA-2110A

Low Density Polyethylene

Supplied by REPSOL YPF

The technical datasheet with complete property values for ALCUDIA® CA-2110A is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
ALCUDIA® CA-2110A is stabilized with Ni quencher (yellow greenish colour), UV absorber and antioxidants. This compound offers high solar radiation resistance.
Applications include films for covering greenhouses and tunnels.
ALCUDIA® CA-2110A, 180µm thickness films have a lifetime of two seasons in the south of Spain.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Additive 
  • Antioxidant
  • UV Stabilizer
  
Features 
  • Antioxidant
Uses 
  • Agricultural Applications
  • Film
  
Forms 
  • Pellets
Processing Method 
  • Blown Film
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
g/10 min
 ISO 1133
Films
Nominal Value
Unit
Test Method
Film Thickness - Tested
mil
  
Tensile Stress
     ISO 527-3
MD: Yield, 7.1 mil, Blown Film
psi
  
TD: Yield, 7.1 mil, Blown Film
psi
  
MD: 7.1 mil, Blown Film
psi
  
TD: 7.1 mil, Blown Film
psi
  
Tensile Elongation
     ISO 527-3
MD: Break, 7.1 mil, Blown Film
%
  
TD: Break, 7.1 mil, Blown Film
%
  
Dart Drop Impact (7.1 mil, Blown Film)
g
 ISO 7765-1
Elmendorf Tear Strength
     ISO 6383-2
MD: 7.1 mil, Blown Film
lbf
  
TD: 7.1 mil, Blown Film
lbf
  
Optical
Nominal Value
Unit
Test Method
Haze (7.09 mil, Blown Film)
%
 ASTM D1003
Additional Information
Film properties taken from 180µm film with a blow up ratio of 2.25:1.
Total Visible Light Transmission, ISO 13468-2, 180µm Blown Film: 89%
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: ALCUDIA® CA-2110A, ALCUDIA CA2110A, ALCUDIA® , ALCUDIA, ALCUDIACA2110A, CA, CA 2110 A, CA-2110A, CA2110A, CA:2110A, CA/2110A, CA+2110A, CA_2110A, CA 2110A, CA2110, 2110A, Polyethylene, Low Density, Polyethylene Low Density, LDPE, Polyethylene, PE, Repsol YPF, PolyethyleneLowDensity, 2110CA
Extrusion
Nominal Value
Unit
 
Melt Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.