IDES Prospector Already have an account? Login Here

IDES

ALCUDIA® CA-2131P

Low Density Polyethylene

Supplied by REPSOL YPF

The technical datasheet with complete property values for ALCUDIA® CA-2131P is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
ALCUDIA® CA-2131P is stabilized with HALS (colorless), UV absorbers and antioxidants. It contains medium and long wave IR absorber. The main properties of these compound films are high solar radiation resistance, visible light diffusion, heat retention and UV blocking.
ALCUDIA® CA-2131P is specially recommended for antipest films for covering greenhouses and tunnels. It is suitable for reducing fungi sporulation and insects population that transmit viruses. Interferences with pollinators have not been detected in the field trials carried out. Nevertheless, due to great variety of these insects, interferences should not be discarded. REPSOL-YPF assumes NO responsibility for any damages in regard to this cause.
ALCUDIA® CA-2131P 200µm thickness films have a lifetime of two seasons in the south of Spain.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Additive 
  • Antioxidant
  • UV Stabilizer
  
Features 
  • Antioxidant
  • Good UV Resistance
  
Uses 
  • Agricultural Applications
  • Film
  
Forms 
  • Pellets
Processing Method 
  • Blown Film
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
g/10 min
 ISO 1133
Films
Nominal Value
Unit
Test Method
Film Thickness - Tested
mil
  
Tensile Stress
     ISO 527-3
MD: Yield, 7.9 mil, Blown Film
psi
  
TD: Yield, 7.9 mil, Blown Film
psi
  
MD: 7.9 mil, Blown Film
psi
  
TD: 7.9 mil, Blown Film
psi
  
Tensile Elongation
     ISO 527-3
MD: Break, 7.9 mil, Blown Film
%
  
TD: Break, 7.9 mil, Blown Film
%
  
Dart Drop Impact (7.9 mil, Blown Film)
g
 ISO 7765-1
Elmendorf Tear Strength
     ISO 6383-2
MD: 7.9 mil, Blown Film
lbf
  
TD: 7.9 mil, Blown Film
lbf
  
Optical
Nominal Value
Unit
Test Method
Haze (7.87 mil, Blown Film)
%
 ASTM D1003
Additional Information
Film properties taken from 200µm film with a blow up ratio of 2.25:1.
Total Visible Light Transmission, ISO 13468-2, 200µm Blown Film: 87%
IR Effectiveness, EN 13206, 200µm Blown Film: 15%
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: ALCUDIA® CA-2131P, ALCUDIA CA2131P, ALCUDIA® , ALCUDIA, ALCUDIACA2131P, CA, CA 2131 P, CA-2131P, CA2131P, CA:2131P, CA/2131P, CA+2131P, CA_2131P, CA 2131P, CA2131, 2131P, Polyethylene, Low Density, Polyethylene Low Density, LDPE, Polyethylene, PE, Repsol YPF, PolyethyleneLowDensity, 2131CA
Features
Features may also be described by the following terms: Good UV Resistance, UV Resistant, Ultraviolet Resistant, Ultraviolet Light Resistant.
Extrusion
Nominal Value
Unit
 
Melt Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.