IDES Prospector Already have an account? Login Here

IDES

Iotek™ 3110

Ethylene Acrylic Acid Copolymer Resin

Supplied by ExxonMobil Chemical

The technical datasheet with complete property values for Iotek™ 3110 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
IOTEK 3110 is a sodium ionomer, for film extrusion and coextrusion which offers :
  • good mechanical strength
  • excellent clarity and gloss
  • excellent hot tack and seal strength
  • easy processability - low odor

Processing Conditions:
To minimize corrosion risk, all exposed metal surfaces in the extruder and die should be made from corrosion resistant metals or nickel/chrome plated.
IOTEK 3110 should be fed into the extruder after LDPE of a similar or higher melt index.
Machines should always be completely purged with LDPE or a suitable cleaning compound before shutdown.
Cation containing polymers pick up moisture from the atmosphere if exposed for prolonged periods. It is therefore recommended to reseal tightly the package after each production run.
General  
Material Status 
  • Commercial: Active
Availability 
  • Africa & Middle East
  • Asia Pacific
  • Europe
Physical
Nominal Value
Unit
Test Method
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
g/10 min
 ASTM D1238
Films
Nominal Value
Unit
Test Method
Secant Modulus
     ASTM D882
1% Secant, MD
psi
  
1% Secant, TD
psi
  
Tensile Strength
     ASTM D882
MD: Break
psi
  
TD: Break
psi
  
Tensile Elongation
     ASTM D882
MD: Break
%
  
TD: Break
%
  
Dart Drop Impact
g
 ASTM D1709A
Elmendorf Tear Strength
     ASTM D1922
MD
g
  
TD
g
  
Thermal
Nominal Value
Unit
Test Method
Vicat Softening Temperature
°F
 ASTM D1525
Optical
Nominal Value
Unit
Test Method
Gloss (45°)
 
 ASTM D2457
Haze
%
 ASTM D1003
Legal Statement
Contact your ExxonMobil Chemical Customer Service Representative for potential food contact application compliance (e.g. FDA, EU, HPFB).

This product is not intended for use in medical applications and should not be used in any such applications.
Related Terminology
This supplier and product may also be known by these terms: Exxon, Exxon Mobil, Exxon Mobile, Advanced Elastomer Systems, AES

Product names can be difficult to match. You may have searched any one of these terms to find this product: Iotek™ 3110, Iotek 3110, Iotek™ , Iotek, Iotek3110, 3110, Ethylene Acrylic Acid Copolymer, EAA, Thermoplastic Elastomer, TPE, ExxonMobil, EthyleneAcrylicAcidCopolymer, ThermoplasticElastomer
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.