ALCUDIA 3802-CC Repsol YPF Polyethylene, Medium Density

Product Description

ALCUDIA® 3802-CC yellow compound, without cadmium pigments, is an hexene copolymer of high molecular weight especially apt for the extrusion of stripes on black gas pressure pipe made of 3802-N, to comply with the requirements of the prEN 1555 european standards.
The combination of the antioxidant system and the light stabilizer system used in the 3802-CC provides the following features: excellent protection against thermal oxidation during processing, long term stability, and excellent cracking resistance

General

Material Status

Commercial: Active

Availability

Europe

Additive

Antioxidant

UV Stabilizer

Features

Antioxidant

Copolymer

High ESCR (Stress Crack Resist.)

High Molecular Weight

Uses

Piping

Appearance

Yellow

Forms

Pellets

Processing Method

Extrusion

Pipe Extrusion

Physical	Nominal Value	Unit	Test Method
Density		g/cm³	ISO 1183
Melt Mass-Flow Rate (MFR) (190°C/5.0 kg)		g/10 min	ISO 1133
Environmental Stress-Cracking Resistance (10% Antarox CO-630, F50)		hr	ASTM D1693
Mechanical	Nominal Value	Unit	Test Method
Tensile Strength (Break)		psi	ASTM D638
Tensile Elongation (Break)		%	ASTM D638
Flexural Modulus		psi	ASTM D790
Additional Information
Internal Pressure Resistance, PrEN 12201, 20°C, 10.0 MPa: >100 hr Internal Pressure Resistance, PrEN 12201, 80°C, 4.6 MPa: >165 hr Internal Pressure Resistance, PrEN 12201, 80°C, 4.0 MPa: >1000 hr Oxidation Induction Time (OIT), UNE 53-333, 210°C: >15 min
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: ALCUDIA® 3802-CC, ALCUDIA 3802CC, ALCUDIA® , ALCUDIA, ALCUDIA3802CC, 3802, 3802-CC, 3802CC, 3802:CC, 3802/CC, 3802+CC, 3802_CC, 3802 CC, Polyethylene, Medium Density, Polyethylene Medium Density, MDPE, Polyethylene, PE, Repsol YPF, PolyethyleneMediumDensity, CC3802
Features
Features may also be described by the following terms: High Molecular Weight, High MW, High Environmental Stress Cracking Resistance, High ESCR, Stress Cracking Resistant.
Uses
Uses may also be described by the following terms: Piping, Pipe.

Extrusion	Nominal Value	Unit
Cylinder Zone 1 Temp.		°F
Cylinder Zone 2 Temp.		°F
Cylinder Zone 3 Temp.		°F
Cylinder Zone 4 Temp.		°F
Melt Temperature		°F
Extrusion Notes
Crosshead Zone 1 Temperature: 190 to 210°C Crosshead Zone 2 Temperature: 190 to 210°C Crosshead Zone 3 Temperature: 190 to 210°C

Notes

¹Typical properties: these are not to be construed as specifications.

ALCUDIA® 3802-CC

Medium Density Polyethylene

Supplied by REPSOL YPF