IDES Prospector Already have an account? Login Here

IDES

ALCUDIA® 47100

High Density Polyethylene

Supplied by REPSOL YPF

The technical datasheet with complete property values for ALCUDIA® 47100 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
ALCUDIA® 47100 natural compound is an hexene copolymer of high molecular weight especially apt for the extrusion of pipe.
This product is supplied in natural colour, but they can be easily coloured with pigments steady at processing temperature, using dry-colouring masterbatch techniques.
The ALCUDIA® 47100 may be used in contact with foodstuffs.
The ALCUDIA® compound 47100 has excellent mechanical properties, cracking resistance and gtood resistance to internal pressure.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Features 
  • Copolymer
  • Food Contact Acceptable
  • High ESCR (Stress Crack Resist.)
  • High Molecular Weight
  • Medium Rigidity
Uses 
  • Piping
Appearance 
  • Natural Color
Forms 
  • Pellets
Processing Method 
  • Extrusion
  • Pipe Extrusion
  
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR)
     ISO 1133
190°C/2.16 kg
g/10 min
  
190°C/21.6 kg
g/10 min
  
190°C/5.0 kg
g/10 min
  
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength
     ASTM D638
Yield
psi
  
Break
psi
  
Tensile Elongation
     ASTM D638
Yield
%
  
Break
%
  
Flexural Modulus
psi
 ASTM D790
Hardness
Nominal Value
Unit
Test Method
Durometer Hardness (Shore D)
 
 ASTM D2240
Thermal
Nominal Value
Unit
Test Method
Brittleness Temperature
°F
 ASTM D746
Vicat Softening Temperature
°F
 ASTM D1525 2
Additional Information
Internal Pressure Resistance, PrEN 12201, 20°C, 10.0 MPa: >100 hr
Internal Pressure Resistance, PrEN 12201, 80°C, 4.6 MPa: >165 hr
Internal Pressure Resistance, PrEN 12201, 80°C, 4.0 MPa: >1000 hr
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: ALCUDIA® 47100, ALCUDIA 47100, ALCUDIA® , ALCUDIA, ALCUDIA47100, 47100, Polyethylene, High Density, Polyethylene High Density, HDPE, Polyethylene, PE, Repsol YPF, PolyethyleneHighDensity
Features
Features may also be described by the following terms: Medium Rigidity, Good Rigidity, High Molecular Weight, High MW, High Environmental Stress Cracking Resistance, High ESCR, Stress Cracking Resistant.
Uses
Uses may also be described by the following terms: Piping, Pipe.
Extrusion
Nominal Value
Unit
 
Cylinder Zone 1 Temp.
°F
  
Cylinder Zone 2 Temp.
°F
  
Cylinder Zone 3 Temp.
°F
  
Cylinder Zone 4 Temp.
°F
  
Melt Temperature
°F
  
Extrusion Notes
Crosshead Zone 1 Temperature: 190 to 210°C
Crosshead Zone 2 Temperature: 190 to 210°C
Crosshead Zone 3 Temperature: 190 to 210°C
Notes
1Typical properties: these are not to be construed as specifications.
2Rate A (50°C/h)
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.