IDES Prospector Already have an account? Login Here

IDES

ALCUDIA® 53070

High Density Polyethylene

Supplied by REPSOL YPF

The technical datasheet with complete property values for ALCUDIA® 53070 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
ALCUDIA® 53070 is a high density polyethylene copolymer of hexane, with high molecular weight. It is specially designed to make, by blow moulding, tanks of medium and high capacity. Also for thermororming sheets.
This grade contains stabilizers according to the end use of the item in order to reinforce the thermal stability.
ALCUDIA® 53070 polyethylene includes stabilizers that permit it to retain the properties after undergoing high temperatures during processing.
High compression resistance drums can be obtained with ALCUDIA® 53070 due to its high molecular weight and density.
ALCUDIA® 53070 is approed for food contact under certain legislation.
General  
Material Status 
  • Commercial: Active
Availability 
  • Europe
Features 
  • Copolymer
  • Food Contact Acceptable
  • High Molecular Weight
Uses 
  • Jerricans
  • Tanks
  
Forms 
  • Pellets
Processing Method 
  • Blow Molding
  • Thermoforming
  
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR)
     ISO 1133
190°C/2.16 kg
g/10 min
  
190°C/21.6 kg
g/10 min
  
190°C/5.0 kg
g/10 min
  
Mechanical
Nominal Value
Unit
Test Method
Tensile Stress
     ISO 527-2
Yield
psi
  
Break
psi
  
Tensile Strain
     ISO 527-2
Yield
%
  
Break
%
  
Flexural Modulus
psi
 ISO 178
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength (-22°F)
ft·lb/in²
 ISO 179
Hardness
Nominal Value
Unit
Test Method
Shore Hardness (Shore D)
 
 ISO 868
Thermal
Nominal Value
Unit
Test Method
Vicat Softening Temperature
°F
 ISO 306
Additional Information
Environmental Stress Cracking Resistance (ESCR), MA-55-3020, F50: 190 hr
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: ALCUDIA® 53070, ALCUDIA 53070, ALCUDIA® , ALCUDIA, ALCUDIA53070, 53070, Polyethylene, High Density, Polyethylene High Density, HDPE, Polyethylene, PE, Repsol YPF, PolyethyleneHighDensity
Features
Features may also be described by the following terms: High Molecular Weight, High MW.
Extrusion
Nominal Value
Unit
 
Cylinder Zone 1 Temp.
°F
  
Adapter Temperature
°F
  
Melt Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.