IDES Prospector Already have an account? Login Here

IDES

BC PS MF-303

High Impact Polystyrene

Supplied by BC Chemical Co., Ltd.

The technical datasheet with complete property values for BC PS MF-303 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
Forms 
  • Pellets
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Melt Mass-Flow Rate (MFR) (200°C/5.0 kg)
g/10 min
 ASTM D1238
Molding Shrinkage - Flow
in/in
 ASTM D955
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength 2 (Yield, 73°F, 0.125 in)
psi
 ASTM D638
Tensile Elongation 2 (Break, 73°F, 0.125 in)
%
 ASTM D638
Flexural Modulus 3 (73°F, 0.125 in)
psi
 ASTM D790
Flexural Strength 3 (73°F, 0.125 in)
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact
     ASTM D256A
73°F, 0.125 in
ft·lb/in
  
73°F, 0.250 in
ft·lb/in
  
Hardness
Nominal Value
Unit
Test Method
Rockwell Hardness (L-Scale)
 
 ASTM D785
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load (264 psi, Unannealed, 0.500 in)
°F
 ASTM D648
Vicat Softening Temperature
°F
 ASTM D1525 4
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL
     UL 94
0.0625 in
 
  
0.125 in
 
  
UL File Number
 
  
Optical
Nominal Value
Unit
Test Method
Gardner Gloss (60°)
 
 ASTM D523
Additional Information
Volatile Content, GC Method: <1000 ppm
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: BC PS MF-303, BC PS MF303, BC PS , BCPSMF303, BCPS, MF, PSMF-303, PSMF303, PSMF:303, PSMF/303, PSMF+303, PSMF_303, PSMF 303, PSMF, MF-303, MF303, MF:303, MF/303, MF+303, MF_303, MF 303, PS, Polystyrene, High Impact, Polystyrene High Impact, PS (HIPS), PS HIPS, Polystyrene, BC Chemical, PolystyreneHighImpact, PSHIPS, 303MF, 303PSMF
Notes
1Typical properties: these are not to be construed as specifications.
2Type I, 2.0 in/min
30.59 in/min
4Loading 1 (10 N)
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.