IDES Prospector Already have an account? Login Here

IDES

ZGPC SAN D-398

Styrene Acrylonitrile

Supplied by ZhenJiang GPPC Chemical Co., Ltd.

The technical datasheet with complete property values for ZGPC SAN D-398 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
Features 
  • High Flow
Forms 
  • Pellets
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Melt Mass-Flow Rate (MFR) (200°C/5.0 kg)
g/10 min
 ASTM D1238
Molding Shrinkage - Flow
in/in
 ASTM D955
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength 2 (Yield, 73°F, 0.125 in)
psi
 ASTM D638
Flexural Modulus 3 (73°F, 0.125 in)
psi
 ASTM D790
Flexural Strength 3 (73°F, 0.125 in)
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact (73°F, 0.250 in)
ft·lb/in
 ASTM D256A
Hardness
Nominal Value
Unit
Test Method
Rockwell Hardness (M-Scale)
 
 ASTM D785
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load (264 psi, Unannealed, 0.500 in)
°F
 ASTM D648
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL (0.0625 in)
 
 UL 94
UL File Number
 
  
Additional Information
C-UL CSA LS 103112
Melt Flow Rate, ASTM D1238, 200°C/5.0 kg: 15 to 20 g/10 min
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: ZGPC SAN D-398, ZGPC SAN D398, ZGPC SAN , ZGPCSAND398, ZGPCSAN, SAND-398, SAND398, SAND:398, SAND/398, SAND+398, SAND_398, SAND 398, SAND, D-398, D398, D:398, D/398, D+398, D_398, D 398, Styrene Acrylonitrile, SAN, ZhenJiang GPPC, StyreneAcrylonitrile, 398D, 398SAND
Features
Features may also be described by the following terms: High Flow, High Melt, High MFI.
Notes
1Typical properties: these are not to be construed as specifications.
2Type I, 2.0 in/min
30.59 in/min
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.