Zytel HTN 51G15HSL BK083 DuPont Polyphthalamide (Glass Fiber Reinforcement, 15%)

Product Description

Zytel® HTN51G15HSL BK083 is a 15% glass reinforced, heat stabilized, lubricated high performance polyamide resin. It is also a PPA resin.

General

Material Status

Commercial: Active

Availability

Asia Pacific

Europe

North America

Filler / Reinforcement

Glass Fiber Reinforcement, 15% Filler by Weight

Additive

Heat Stabilizer

Features

Heat Stabilized

Ultrasonic Weldable

RoHS Compliance

Automotive Specifications

Appearance

Black

Part Marking Code (ISO 11469)

>PA6T/XT-GF15<

Resin ID (ISO 1043)

PA6T/XT-GF15

Part Marking Code (SAE J1344)

Physical	Nominal Value	Unit	Test Method
Specific Gravity
--			ASTM D792
--		g/cm³	ISO 1183
Molding Shrinkage
Flow: 0.0630 in		in/in	Internal Method
Flow: 0.126 in		in/in	Internal Method
Across Flow: 0.0630 in		in/in	Internal Method
Across Flow: 0.126 in		in/in	Internal Method
Across Flow: 0.0787 in		%	ISO 294-4
Flow: 0.0787 in		%	ISO 294-4
Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus (73°F)		psi	ISO 527-2
Tensile Stress
Break, 73°F		psi	ISO 527-2
73°F		psi	ASTM D638
Tensile Elongation (Break, 73°F)		%	ASTM D638, ISO 527-2
Flexural Modulus
73°F		psi	ASTM D790
73°F		psi	ISO 178
Flexural Strength (73°F)		psi	ASTM D790
Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength			ISO 179/1eA
-40°F		ft·lb/in²
73°F		ft·lb/in²
Charpy Unnotched Impact Strength (73°F)		ft·lb/in²	ISO 179/1eU
Notched Izod Impact
73°F		ft·lb/in	ASTM D256
-40°F		ft·lb/in²	ISO 180/1A
73°F		ft·lb/in²	ISO 180/1A
Thermal	Nominal Value	Unit	Test Method
Heat Deflection Temperature
66 psi, Unannealed		°F	ISO 75-2/B
264 psi, Unannealed		°F	ASTM D648
264 psi, Unannealed		°F	ISO 75-2/A
Melting Temperature²		°F	ISO 11357-3, ASTM D3418
Electrical	Nominal Value	Unit	Test Method
Surface Resistivity		ohms	IEC 60093
Volume Resistivity		ohm·cm	IEC 60093
Relative Permittivity			IEC 60250
73°F, 1 kHz
73°F, 1 MHz
Dissipation Factor			IEC 60250
73°F, 1 kHz
73°F, 1 MHz
Comparative Tracking Index		V	IEC 60112
Electric Strength (73°F)		V/mil	IEC 60243-1
Flammability	Nominal Value	Unit	Test Method
Flame Rating - UL			UL 94
0.0295 in
0.0591 in
0.118 in
Flammability Classification			IEC 60695-11-10, -20
0.0295 in
0.0591 in
0.118 in
Oxygen Index		%	ISO 4589-2
UL	Nominal Value	Unit	Test Method
RTI Str			UL 746
0.0295 in		°F
0.0591 in		°F
0.118 in		°F
RTI Imp			UL 746
0.0295 in		°F
0.0591 in		°F
0.118 in		°F
RTI Elec			UL 746
0.0295 in		°F
0.0591 in		°F
0.118 in		°F
Comparative Tracking Index (CTI)		V	UL 746
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: Zytel® HTN 51G15HSL BK083, Zytel HTN 51G15HSL BK083, Zytel® HTN , Zytel HTN, ZytelHTN51G15HSLBK083, ZytelHTN, HTN 51 G 15 HSL BK 083, HTN51G15HSL BK083, HTN51, HTN, 51 G 15 HSL BK 083, HTN51G15HSLBK083, 51G15HSL BK083, 51G, G15, 15HSL, HSLBK, BK083, 51G15HSLBK083, Polyphthalamide, PPA, Polyamide, Nylon, DuPont, G51, 51HTN
Features
Features may also be described by the following terms: Heat Stabilized, Heat-ageing Stabilized, Heat Ageing Stabilized, Heat-aging Stabilized, Heat Aging Stabilized, Ultrasonic Weldable.
Automotive Specifications
This plastic material has approval for 5 automotive specifications from the following agencies (the number in parentheses shows the number of specifications for that agency): ASTM (1), TYCO ELECTRONICS (1), GM (1), CHRYSLER (1), AMP (1).

Injection	Nominal Value	Unit
Drying Temperature		°F
Drying Time		hr
Suggested Max Moisture		%
Processing (Melt) Temp		°F
Melt Temperature, Optimum		°F
Mold Temperature		°F
Mold Temperature, Optimum		°F
Drying Recommended

Notes

¹Typical properties: these are not to be construed as specifications.

²10°C/min, First Heat

Zytel® HTN 51G15HSL BK083

HIGH PERFORMANCE POLYAMIDE RESIN

Glass Fiber Reinforcement, 15%

Supplied by DuPont Performance Polymers