IDES Prospector Already have an account? Login Here

IDES

Delrin® 300ATB BK000

ACETAL RESIN

Unspecified Filler\Reinfor.

Supplied by DuPont Performance Polymers

The technical datasheet with complete property values for Delrin® 300ATB BK000 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
Delrin® 300ATB BK000 is a filled, medium viscosity, toughened acetal homopolymer for injection molding. It is well suited for antistatic applications.
General  
Material Status 
  • Preliminary Data 1
Availability 
  • Asia Pacific
  • Europe
  • North America
Filler / Reinforcement 
  • Unspecified Filler\Reinfor.
RoHS Compliance 
Appearance 
  • Black
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
g/10 min
 ISO 1133
Molding Shrinkage
     Internal Method
Flow: 0.157 in
in/in
  
Across Flow: 0.157 in
in/in
  
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus (73°F)
psi
 ISO 527-2
Tensile Stress (Break, 73°F)
psi
 ISO 527-2
Tensile Strain (Break, 73°F)
%
 ISO 527-2
Flexural Modulus (73°F)
psi
 ISO 178
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength (73°F)
ft·lb/in²
 ISO 179/1eA
Notched Izod Impact Strength (73°F)
ft·lb/in²
 ISO 180/1A
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature
      
66 psi, Unannealed
°F
 ISO 75-2/B
264 psi, Unannealed
°F
 ISO 75-2/A
Melting Temperature 3
°F
 ISO 11357-3
Electrical
Nominal Value
Unit
Test Method
Surface Resistivity
ohm
 IEC 60093
Volume Resistivity
ohm·cm
 IEC 60093
Related Terminology
This supplier and product may also be known by these terms: Derlin

Product names can be difficult to match. You may have searched any one of these terms to find this product: Delrin® 300ATB BK000, Delrin 300ATB BK000, Delrin® , Delrin, Delrin300ATBBK000, 300 ATB BK 000, 300ATB BK000, 300ATB, ATBBK, BK000, 300ATBBK000, Acetal Homopolymer, Acetal Homopolymer, Acetal (POM) Homopolymer, Acetal POM Homopolymer, Acetal, pom, DuPont, AcetalPOMHomopolymer, ATB300
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Suggested Max Moisture
%
  
Processing (Melt) Temp
°F
  
Melt Temperature, Optimum - Injection Molding
°F
  
Mold Temperature
°F
  
Mold Temperature, Optimum - Injection Molding
°F
  
Notes
1The above data are preliminary and are subject to change as additional data are developed on subsequent lots.
2Typical properties: these are not to be construed as specifications.
310°C/min
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.