IDES Prospector Already have an account? Login Here

IDES

ASTALAC™ FBK-M

Acrylonitrile Butadiene Styrene

Supplied by Marplex Australia Pty. Ltd.

The technical datasheet with complete property values for ASTALAC™ FBK-M is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
ASTALAC™ FBK-M is a structural foam flame retardant grade of ABS which meets the stringent AS/NZS 60695.2.12 (IEC 60695-2-12) Glow Wire flammability test and offers a "high strength to weight ratio". The physical properties depend greatly on the density reduction achieved during moulding. Typical applications include very thick components requiring flame retardancy such as computer casings and low volume production automotive wheel arch fairings. Due to the foaming process, the component surface appearance will be slightly compromised. Consequently, many applications are painted.
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
  • North America
  • South America
Additive 
  • Flame Retardant
Features 
  • Flame Retardant
  • Foamable
  • High Strength
  • Paintable
  
Uses 
  • Automotive Applications
  • Structural Foam
  
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Molding Shrinkage - Flow (0.118 in)
in/in
 ASTM D955
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength 2 (0.126 in)
psi
 ASTM D638
Tensile Elongation 2 (Break, 0.126 in)
%
 ASTM D638
Flexural Modulus 3 (0.126 in)
psi
 ASTM D790
Flexural Strength 3 (0.126 in)
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact (0.126 in)
ft·lb/in
 ASTM D256
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load (264 psi, Unannealed, 0.500 in)
°F
 ASTM D648
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL (0.0630 in)
 
 UL 94
Glow Wire Ignition Temperature (0.0630 in)
°F
 AS/NZS 60695.2.12
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: ASTALAC™ FBK-M, ASTALAC FBKM, ASTALAC™ , ASTALAC, ASTALACFBKM, FBK, FBK-M, FBKM, FBK:M, FBK/M, FBK+M, FBK_M, FBK M, Acrylonitrile Butadiene Styrene, ABS, Marplex, AcrylonitrileButadieneStyrene, MFBK
Features
Features may also be described by the following terms: High Strength.
Uses
Uses may also be described by the following terms: Automotive Applications, Automotive Sector, Structural Foam.
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Rear Temperature
°F
  
Middle Temperature
°F
  
Front Temperature
°F
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Injection Rate
 
  
Back Pressure
psi
  
Screw Speed
rpm
  
Clamp Tonnage
tons/in²
  
Injection Notes
Injection Pressure: High with minimum material feed to allow foaming within the mould
Do not dry excessively as residual moisture will aid the foaming agent
Notes
1Typical properties: these are not to be construed as specifications.
20.20 in/min
30.051 in/min
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.