IDES Prospector Already have an account? Login Here

IDES

CERTENE™ HGB-0354A

High Density Polyethylene

Supplied by Muehlstein

The technical datasheet with complete property values for CERTENE™ HGB-0354A is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
HGB-0354A is a certified prime Gas Phase blow molding copolymer designed to meet end-use requirements of containers for packaging of Household Industrial Chemicals (HIC). HGB-0354A contains antistatic and features medium swell, easy and consistent processability in conventional continuous or intermittent extrusion equipment, and excellent balance of bottle ESCR, Impact strength and Stiffness. Applications include medium size containers for detergents, bleach, antifreeze, motor oil and ice chests. HGB-0354A recommended processing temperature is 160 to 180°C. with mold at 10 to 30°C.
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Additive 
  • Antistatic
Features 
  • Antifreeze Resistant
  • Antistatic
  • Copolymer
  • Detergent Resistant
  • Good Chemical Resistance
  • Good Processability
  • Good Stiffness
  • High Density
  • High ESCR (Stress Crack Resist.)
  • High Impact Resistance
  • Oil Resistant
Uses 
  • Containers
  • Household Goods
  • Packaging
Forms 
  • Pellets
Processing Method 
  • Blow Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ASTM D1505
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
g/10 min
 ASTM D1238
Environmental Stress-Cracking Resistance (122°F, 100% Igepal, Compression Molded, F50)
hr
 ASTM D1693
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength 2 (Yield, Compression Molded)
psi
 ASTM D638
Tensile Elongation 2 (Break, Compression Molded)
%
 ASTM D638
Flexural Modulus - 1% Secant 3 (Compression Molded)
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Tensile Impact Strength (Compression Molded)
ft·lb/in²
 ASTM D1822
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load (66 psi, Unannealed)
°F
 ASTM D648
Brittleness Temperature
°F
 ASTM D746
Vicat Softening Temperature
°F
 ASTM D1525
Additional Information
This Specimen was compression molded and was tested according to ASTM D1928 Procedure C.
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: CERTENE™ HGB-0354A, CERTENE HGB0354A, CERTENE™ , CERTENE, CERTENEHGB0354A, HGB, HGB 0354 A, HGB-0354A, HGB0354A, HGB:0354A, HGB/0354A, HGB+0354A, HGB_0354A, HGB 0354A, HGB0354, 0354A, Polyethylene, High Density, Polyethylene High Density, HDPE, Polyethylene, PE, Muehlstein, PolyethyleneHighDensity, 0354HGB
Features
Features may also be described by the following terms: High Density, High Specific Gravity, Good Processability, Easy Processing, High Environmental Stress Cracking Resistance, High ESCR, Stress Cracking Resistant, High Impact Resistance, Good Stiffness, Antifreeze Resistant, Resistant to Antifreeze, Good Chemical Resistance, Chemical Resistant, Detergent Resistant, Detergent Resistance.
Uses
Uses may also be described by the following terms: Household Goods, Housewares.
Injection
Nominal Value
Unit
 
Mold Temperature
°F
  
Extrusion
Nominal Value
Unit
 
Melt Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
22.0 in/min
30.051 in/min
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.