IDES Prospector Already have an account? Login Here

IDES

CERTENE™ HI-960

High Density Polyethylene

Supplied by Muehlstein

The technical datasheet with complete property values for CERTENE™ HI-960 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
HI-960 is a certified prime homopolymer designed for molding applications requiring high warpage resistance and good balance of mechanical properties. HI-960 features easy processability, very good stiffness, good impact strength, high surface gloss, and excellent dimensional stability. HI-960 applications include crates, waste bins, pails, housewares, tote bins, fruit and vegetable trays, and structural foam. HI-960 recommended processing temperature is 210 to 240°C. with mmold @ 20 to 40°C.. HI-960 is not UV stabilized.
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Features 
  • Good Dimensional Stability
  • Good Impact Resistance
  • Good Processability
  • Good Stiffness
  • Good Surface Finish
  • High Density
  • High Gloss
  • Homopolymer
  • Warp Resistant
Uses 
  • Crates
  • Household Goods
  • Pails
  • Structural Foam
  • Support Trays
Forms 
  • Pellets
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ASTM D1505
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
g/10 min
 ASTM D1238
Environmental Stress-Cracking Resistance (122°F, 100% Igepal, Compression Molded, F50)
hr
 ASTM D1693
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength 2 (Yield, Compression Molded)
psi
 ASTM D638
Tensile Elongation 2 (Break, Compression Molded)
%
 ASTM D638
Flexural Modulus - 1% Secant 3 (Compression Molded)
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Tensile Impact Strength (Compression Molded)
ft·lb/in²
 ASTM D1822
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load (66 psi, Unannealed)
°F
 ASTM D648
Brittleness Temperature
°F
 ASTM D746
Vicat Softening Temperature
°F
 ASTM D1525
Additional Information
This Specimen was compression molded and was tested according to ASTM D1928 Procedure C.
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: CERTENE™ HI-960, CERTENE HI960, CERTENE™ , CERTENE, CERTENEHI960, HI, HI-960, HI960, HI:960, HI/960, HI+960, HI_960, HI 960, Polyethylene, High Density, Polyethylene High Density, HDPE, Polyethylene, PE, Muehlstein, PolyethyleneHighDensity, 960HI
Features
Features may also be described by the following terms: High Density, High Specific Gravity, Warp Resistant, Warpage Resistant, Good Processability, Easy Processing, Good Stiffness, Good Impact Resistance, High Gloss, Good Surface Finish, Good Dimensional Stability, Dimensionally Stable.
Uses
Uses may also be described by the following terms: Household Goods, Housewares, Support Trays, Structural Foam.
Injection
Nominal Value
Unit
 
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
22.0 in/min
30.051 in/min
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.