IDES Prospector Already have an account? Login Here

IDES

CERTENE™ LLBF-120C

Linear Low Density Polyethylene

Supplied by Muehlstein

The technical datasheet with complete property values for CERTENE™ LLBF-120C is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
LLBF-120C is a certified prime resin containing Butene-comonomer, specially designed for production of Blown films for general purpose packaging. LLBF-120C features easy processability with very good film strength as well as wide heat sealing temperature range. LLBF-120C major applications include garment bags, produce bags and liners. Maximum recommended film drawdown is 0.5 mil. LLBF-120C contains medium slip and medium antiblock.
General  
Material Status 
  • Commercial: Active
Availability 
  • North America
Additive 
  • Medium Antiblock
  • Medium Slip
  
Features 
  • General Purpose
  • Good Heat Seal
  • Good Processability
  • Low Density
  • Medium Antiblocking
  • Medium Slip
Uses 
  • Bags
  • Film
  • General Purpose
  • Liners
  • Packaging
Forms 
  • Pellets
Processing Method 
  • Blown Film
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ASTM D1505
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
g/10 min
 ASTM D1238
Films
Nominal Value
Unit
Test Method
Film Thickness - Tested
mil
  
Secant Modulus
     ASTM D882
1% Secant, MD: 1.0 mil
psi
  
1% Secant, TD: 1.0 mil
psi
  
Tensile Strength
     ASTM D882
MD: Yield, 1.0 mil
psi
  
TD: Yield, 1.0 mil
psi
  
MD: Break, 1.0 mil
psi
  
TD: Break, 1.0 mil
psi
  
Tensile Elongation
     ASTM D882
MD: Break, 1.0 mil
%
  
TD: Break, 1.0 mil
%
  
Dart Drop Impact (1.0 mil)
g
 ASTM D1709A
Elmendorf Tear Strength
     ASTM D1922
MD: 1.0 mil
g
  
TD: 1.0 mil
g
  
Optical
Nominal Value
Unit
Test Method
Gloss (45°, 1.00 mil)
 
 ASTM D2457
Haze (1.00 mil)
%
 ASTM D1003
Additional Information
This Specimen was compression molded and was tested according to ASTM D1928 Procedure C.
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: CERTENE™ LLBF-120C, CERTENE LLBF120C, CERTENE™ , CERTENE, CERTENELLBF120C, LLBF, LLBF 120 C, LLBF-120C, LLBF120C, LLBF:120C, LLBF/120C, LLBF+120C, LLBF_120C, LLBF 120C, LLBF120, 120C, Polyethylene, Linear Low Density, Polyethylene Linear Low Density, LLDPE, Polyethylene, PE, Muehlstein, PolyethyleneLinearLowDensity, 120LLBF
Features
Features may also be described by the following terms: Low Density, Low Specific Gravity, Good Processability, Easy Processing, Good Heat Seal, Medium Antiblocking, Medium Antiblock, Medium Slip.
Extrusion
Nominal Value
Unit
 
Melt Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.