CERTENE LLBF-121D Muehlstein Polyethylene, Linear Low Density

Product Description

LLBF-121D is a certified prime resin containing Butene-comonomer, specially designed for production of Blown films for general purpose packaging. LLBF-121D features easy processability with very good film strength as well as wide heat sealing temperature range. LLBF-121D major applications include garment bags, produce bags and liners. Maximum recommended film drawdown is 0.5 mil. LLBF-121D contains medium slip and high antiblock.

General

Material Status

Commercial: Active

Availability

North America

Additive

Medium Antiblock

Medium Slip

Features

General Purpose

Good Heat Seal

Good Processability

High Antiblocking

Low Density

Medium Slip

Uses

Bags

Film

General Purpose

Liners

Packaging

Forms

Pellets

Processing Method

Blown Film

Physical	Nominal Value	Unit	Test Method
Density		g/cm³	ASTM D1505
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)		g/10 min	ASTM D1238
Films	Nominal Value	Unit	Test Method
Film Thickness - Tested		mil
Secant Modulus			ASTM D882
1% Secant, MD: 1.0 mil		psi
1% Secant, TD: 1.0 mil		psi
Tensile Strength			ASTM D882
MD: Yield, 1.0 mil		psi
TD: Yield, 1.0 mil		psi
MD: Break, 1.0 mil		psi
TD: Break, 1.0 mil		psi
Tensile Elongation			ASTM D882
MD: Break, 1.0 mil		%
TD: Break, 1.0 mil		%
Dart Drop Impact (1.0 mil)		g	ASTM D1709A
Elmendorf Tear Strength			ASTM D1922
MD: 1.0 mil		g
TD: 1.0 mil		g
Optical	Nominal Value	Unit	Test Method
Gloss (45°, 1.00 mil)			ASTM D2457
Haze (1.00 mil)		%	ASTM D1003
Additional Information
This Specimen was compression molded and was tested according to ASTM D1928 Procedure C.
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: CERTENE™ LLBF-121D, CERTENE LLBF121D, CERTENE™ , CERTENE, CERTENELLBF121D, LLBF, LLBF 121 D, LLBF-121D, LLBF121D, LLBF:121D, LLBF/121D, LLBF+121D, LLBF_121D, LLBF 121D, LLBF121, 121D, Polyethylene, Linear Low Density, Polyethylene Linear Low Density, LLDPE, Polyethylene, PE, Muehlstein, PolyethyleneLinearLowDensity, 121LLBF
Features
Features may also be described by the following terms: Low Density, Low Specific Gravity, Good Processability, Easy Processing, Good Heat Seal, High Antiblocking, High Antiblock, Medium Slip.

Extrusion	Nominal Value	Unit
Melt Temperature		°F

Notes

¹Typical properties: these are not to be construed as specifications.

CERTENE™ LLBF-121D

Linear Low Density Polyethylene

Supplied by Muehlstein