CERTENE LDF-0822A Muehlstein Polyethylene, Low Density

Product Description

LDF-0822A is a certified prime resin specially designed for production of shrink wrapping Blown films for case bundling applications requiring excellent shrink performance, very high toughness, good puncture and burn-through resistance. LDF-0822A is also recommended for impact liner films. It features easy processability with excellent film optical and mechanical properties. Minimum recommended film thickness is 1.5 mils. LDF-0822A contains no slip and no antiblock.

General

Material Status

Commercial: Active

Availability

North America

Features

Good Processability

High Shrinkage

Low Density

Opticals

Puncture Resistant

Ultra High Toughness

Uses

Film

Liners

Shrink Wrap

Forms

Pellets

Processing Method

Blown Film

Physical	Nominal Value	Unit	Test Method
Density		g/cm³	ASTM D1505
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)		g/10 min	ASTM D1238
Films	Nominal Value	Unit	Test Method
Film Thickness - Tested		mil
Secant Modulus			ASTM D882
1% Secant, MD: 1.5 mil		psi
1% Secant, TD: 1.5 mil		psi
Tensile Strength			ASTM D882
MD: Yield, 1.5 mil		psi
TD: Yield, 1.5 mil		psi
MD: Break, 1.5 mil		psi
TD: Break, 1.5 mil		psi
Tensile Elongation			ASTM D882
MD: Break, 1.5 mil		%
TD: Break, 1.5 mil		%
Dart Drop Impact (1.5 mil)		g	ASTM D1709A
Elmendorf Tear Strength			ASTM D1922
MD: 1.5 mil		g
TD: 1.5 mil		g
Optical	Nominal Value	Unit	Test Method
Gloss (45°, 1.50 mil)			ASTM D2457
Haze (1.50 mil)		%	ASTM D1003
Additional Information
This Specimen was compression molded and was tested according to ASTM D1928 Procedure C.
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: CERTENE™ LDF-0822A, CERTENE LDF0822A, CERTENE™ , CERTENE, CERTENELDF0822A, LDF, LDF 0822 A, LDF-0822A, LDF0822A, LDF:0822A, LDF/0822A, LDF+0822A, LDF_0822A, LDF 0822A, LDF0822, 0822A, Polyethylene, Low Density, Polyethylene Low Density, LDPE, Polyethylene, PE, Muehlstein, PolyethyleneLowDensity, 0822LDF
Features
Features may also be described by the following terms: Low Density, Low Specific Gravity, High Shrinkage, Ultra High Toughness, Good Puncture Resistance, Puncture Resistant, Good Processability, Easy Processing.
Uses
Uses may also be described by the following terms: Shrink Wrap.

Extrusion	Nominal Value	Unit
Melt Temperature		°F

Notes

¹Typical properties: these are not to be construed as specifications.

CERTENE™ LDF-0822A

Low Density Polyethylene

Supplied by Muehlstein