IDES Prospector Already have an account? Login Here

IDES

CERTENE™ LDF-221C

Low Density Polyethylene

Supplied by Muehlstein

The technical datasheet with complete property values for CERTENE™ LDF-221C is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
LDF-221C is a certified prime resin specially designed to meet the requirements of most 1 to 3 mils thickness Blown film liner applications. LDF-221C features easy processability. Large lot size and superior lot-to-lot uniformity ensure consistent film production. Minimum recommended film thickness is 1.0 mil. LDF-221C contains medium slip and medium antiblock.
General  
Material Status 
  • Commercial: Active
Availability 
  • Latin America
  • North America
  
Additive 
  • Medium Antiblock
  • Medium Slip
  
Features 
  • Good Processability
  • Low Density
  • Medium Antiblocking
  • Medium Slip
  
Uses 
  • Film
  • Liners
  
Forms 
  • Pellets
Processing Method 
  • Blown Film
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ASTM D1505
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)
g/10 min
 ASTM D1238
Films
Nominal Value
Unit
Test Method
Film Thickness - Tested
mil
  
Secant Modulus
     ASTM D882
1% Secant, MD: 1.5 mil
psi
  
1% Secant, TD: 1.5 mil
psi
  
Tensile Strength
     ASTM D882
MD: Yield, 1.5 mil
psi
  
TD: Yield, 1.5 mil
psi
  
MD: Break, 1.5 mil
psi
  
TD: Break, 1.5 mil
psi
  
Tensile Elongation
     ASTM D882
MD: Break, 1.5 mil
%
  
TD: Break, 1.5 mil
%
  
Dart Drop Impact (1.5 mil)
g
 ASTM D1709A
Elmendorf Tear Strength
     ASTM D1922
MD: 1.5 mil
g
  
TD: 1.5 mil
g
  
Additional Information
This Specimen was compression molded and was tested according to ASTM D1928 Procedure C.
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: CERTENE™ LDF-221C, CERTENE LDF221C, CERTENE™ , CERTENE, CERTENELDF221C, LDF, LDF 221 C, LDF-221C, LDF221C, LDF:221C, LDF/221C, LDF+221C, LDF_221C, LDF 221C, LDF221, 221C, Polyethylene, Low Density, Polyethylene Low Density, LDPE, Polyethylene, PE, Muehlstein, PolyethyleneLowDensity, 221LDF
Features
Features may also be described by the following terms: Low Density, Low Specific Gravity, Good Processability, Easy Processing, Medium Antiblocking, Medium Antiblock, Medium Slip.
Extrusion
Nominal Value
Unit
 
Melt Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.