IDES Prospector Already have an account? Login Here

IDES

ASTALAC™ ASA576-UV 45001

Acrylonitrile Styrene Acrylate + ABS

Supplied by Marplex Australia Pty. Ltd.

The technical datasheet with complete property values for ASTALAC™ ASA576-UV 45001 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
Product Description
ASTALAC™ ASA576-UV 45001 Black is a specialty modified ASA/ABS blend which is designed for applications requiring a combination of high impact toughness, outstanding weatherability, easy moulding, high product rigidity and medium heat resistance. Containing ABS to aid in maintaining a high impact toughness at low temperatures, Astalac ASA576-UV 45001 Black is designed for use in telecommunication applications such as cable electrical enclosures and other outside use casings.
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
  • North America
  • South America
Features 
  • Good Moldability
  • Good Weather Resistance
  • High Impact Resistance
  • Low Temperature Impact Resistance
  • Medium Heat Resistance
  • Medium Rigidity
Uses 
  • Electrical/Electronic Applications
  • Telecommunications
  
Appearance 
  • Black
Physical
Nominal Value
Unit
Test Method
Specific Gravity
 
 ASTM D792
Melt Mass-Flow Rate (MFR) (220°C/10.0 kg)
g/10 min
 ASTM D1238
Molding Shrinkage - Flow (0.118 in)
in/in
 ASTM D955
Water Absorption (24 hr)
%
 ASTM D570
Mechanical
Nominal Value
Unit
Test Method
Tensile Strength 2 (0.126 in)
psi
 ASTM D638
Tensile Elongation 2 (Break, 0.126 in)
%
 ASTM D638
Flexural Modulus 3 (0.126 in)
psi
 ASTM D790
Flexural Strength 3 (0.126 in)
psi
 ASTM D790
Impact
Nominal Value
Unit
Test Method
Notched Izod Impact (0.126 in)
ft·lb/in
 ASTM D256
Gardner Impact (0.126 in)
in·lb
 ASTM D3029
Hardness
Nominal Value
Unit
Test Method
Rockwell Hardness (R-Scale)
 
 ASTM D785
Thermal
Nominal Value
Unit
Test Method
Deflection Temperature Under Load
     ASTM D648
264 psi, Unannealed, 0.126 in
°F
  
264 psi, Unannealed, 0.252 in
°F
  
264 psi, Unannealed, 0.500 in
°F
  
Vicat Softening Temperature
°F
 ASTM D1525 4
CLTE - Flow
in/in/°F
 ASTM D696
Flammability
Nominal Value
Unit
Test Method
Flame Rating - UL (0.0630 in)
 
 UL 94
Glow Wire Ignition Temperature (0.0630 in)
°F
 AS/NZS 60695.2.12
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: ASTALAC™ ASA576-UV 45001, ASTALAC ASA576UV 45001, ASTALAC™ , ASTALAC, ASTALACASA576UV45001, ASA 576, ASA 576 UV 45001, ASA576-UV 45001, ASA576UV 45001, ASA576:UV 45001, ASA576/UV 45001, ASA576+UV 45001, ASA576_UV 45001, ASA576 UV 45001, ASA576, 576UV, UV45001, ASA576UV45001, ASA576_UV45001, Acrylonitrile Styrene Acrylate + ABS, Acrylonitrile Styrene Acrylate ABS, Acrylonitrile Styrene Acrylate : ABS, Acrylonitrile Styrene Acrylate / ABS, Acrylonitrile Styrene Acrylate - ABS, Acrylonitrile Styrene Acrylate _ ABS, Acrylonitrile Styrene Acrylate ABS, ASA+ABS, ASAABS, ASA:ABS, ASA/ABS, ASA-ABS, ASA_ABS, ASA ABS, Acrylonitrile Styrene Acrylate, ASA, Marplex, AcrylonitrileStyreneAcrylateABS, AcrylonitrileStyreneAcrylate, AcrylonitrileStyreneAcrylate_ABS, 576ASA
Features
Features may also be described by the following terms: Low Temperatuer Impact Resistance, Low Temp Impact Resistance, Good Moldability, Good Weather Resistance, Weather Resistant, High Impact Resistance, Medium Heat Resistance, Medium Rigidity, Good Rigidity.
Uses
Uses may also be described by the following terms: Electrical Applications, Electronic Applications, Electrical/Electronic Applications, Electrical Sector.
Injection
Nominal Value
Unit
 
Drying Temperature
°F
  
Drying Time
hr
  
Rear Temperature
°F
  
Middle Temperature
°F
  
Front Temperature
°F
  
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Injection Pressure
psi
  
Injection Rate
 
  
Back Pressure
psi
  
Screw Speed
rpm
  
Clamp Tonnage
tons/in²
  
Notes
1Typical properties: these are not to be construed as specifications.
20.20 in/min
30.051 in/min
4Loading 1 (10 N)
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.