IDES Prospector Already have an account? Login Here

IDES

ALCOM® PA66 910/1 GF30 MO2

Polyamide 66

Glass Fiber Reinforcement

Supplied by Albis Plastic GmbH

The technical datasheet with complete property values for ALCOM® PA66 910/1 GF30 MO2 is available to members of the Prospector Plastics Database.
Register to view full datasheet.
Register to View Full Datasheet
General  
Material Status 
  • Commercial: Active
Availability 
  • Asia Pacific
  • Europe
  • North America
Filler / Reinforcement 
  • Glass Fiber Reinforcement
Additive 
  • Heat Stabilizer
  • Molybdenum Disulfide Lubricant
  
Features 
  • Good Wear Resistance
  • Heat Stabilized
  • High Stiffness
  • Lubricated
  
Uses 
  • Bearings
  • Bushings
  
Processing Method 
  • Injection Molding
Physical
Nominal Value
Unit
Test Method
Density
g/cm³
 ISO 1183
Mechanical
Nominal Value
Unit
Test Method
Tensile Modulus
psi
 ISO 527-2
Tensile Stress (Break)
psi
 ISO 527-2
Tensile Strain (Break)
%
 ISO 527-2
Flexural Modulus
psi
 ISO 178
Flexural Strength
psi
 ISO 178
Impact
Nominal Value
Unit
Test Method
Charpy Notched Impact Strength (73°F)
ft·lb/in²
 ISO 179/1eA
Charpy Unnotched Impact Strength (73°F)
ft·lb/in²
 ISO 179/1eU
Thermal
Nominal Value
Unit
Test Method
Heat Deflection Temperature (264 psi, Unannealed)
°F
 ISO 75-2/A
Vicat Softening Temperature
°F
 ISO 306/B50
Melting Temperature
°F
 DSC
Electrical
Nominal Value
Unit
Test Method
Surface Resistivity
ohms
 IEC 60093
Related Terminology
Product names can be difficult to match. You may have searched any one of these terms to find this product: ALCOM® PA66 910/1 GF30 MO2, ALCOM PA66 9101 GF30 MO2, ALCOM® PA66 , ALCOM PA66, ALCOMPA669101GF30MO2, ALCOMPA66, PA 66910 1 GF 30 MO 2, PA 66910, 910, PA66910/1 GF30 MO2, PA669101 GF30 MO2, PA66910:1 GF30 MO2, PA66910+1 GF30 MO2, PA66910-1 GF30 MO2, PA66910_1 GF30 MO2, PA66910 1 GF30 MO2, PA66910, 669101, 910 1 GF 30 MO 2, PA669101GF30MO2, 910/1 GF30 MO2, 9101 GF30 MO2, 910:1 GF30 MO2, 910+1 GF30 MO2, 910-1 GF30 MO2, 910_1 GF30 MO2, 910 1 GF30 MO2, 9101, 1GF, GF30, 30MO, MO2, PA66910_1GF30MO2, 9101GF30MO2, 910_1GF30MO2, Polyamide 66, Nylon 66, Polyamide, Nylon, pa66, Albis Euro, Polyamide66, Nylon66, 1910, 66910PA
Generic Name
Generic Name may also be described by the following terms: PA66.
Features
Features may also be described by the following terms: Heat Stabilized, Heat-ageing Stabilized, Heat Ageing Stabilized, Heat-aging Stabilized, Heat Aging Stabilized, High Stiffness, Good Wear Resistance, Wear Resistant.
Injection
Nominal Value
Unit
 
Processing (Melt) Temp
°F
  
Mold Temperature
°F
  
Notes
1Typical properties: these are not to be construed as specifications.
 
IDES
Copyright © 2012 IDES
The information presented on this datasheet was acquired by IDES from the producer of the material. IDES makes substantial efforts to assure the accuracy of this data. However, IDES assumes no responsibility for the data values and strongly encourages that upon final material selection, data points are validated with the material supplier.